Viewing all customer Discussions for:

26-229 Right Hand Tilt Latch, 2-1/8"

Attached are photos of my latch and the sash release lever 26-119 for comparison. The dimensions of my latch are 2" x 3/4" (same, but not critical). The "feet" (one missing) are 1/2" (out to out) where the 26-119 is 1/2" also. The length of the foot is 5/16" with the "toe notch" at 1/4". The 26 ... (cont.)

The clips break easily when the window is snapped back into the frame after cleaning I'm looking for replacement clips.

One pin is broken and is missing.If you find that piece I need five of them.

I need 11 right and 11 left please.

Hello, The pivot pin is 2 3/8" long and 3/4" wide. The screw holes are 1 3/16" and 1 7/8" o/c from the pin side. I would appreciate Any help you can provide in supplying me with this part. It is the pivot pin for a double hung tilt in window. I also need to replace the spring-loaded release clips/ ... (cont.)

Do you carry this type of tilt window latches. They screw into top of window under plastic molding. It?s a half inch wide and 4&1/2 to 5 inches long. Thanks for your help.

width of square part is 1" width of angled part that sticks in window is 9/16"

the attached is an internal tilt latch for a syron window. we are having a hard time finding replacement parts. we can go with a top mounted if we have to do so but would like the correct part

I need 2 of these vent stops for my certainteed windows

I need the "J " facing me when holding it lengthwise

I did not see this part shown on your web site.Can you identify it?I need 6 of these window latches.Richard

I need for 3 windows

We ordered parts 15-178, 26-228 and 26-229 to repair our windows.Are there directions for their installation?We couldn't find any.Thank you for your attention to this matter.Jean L.

Here is a picture a my broken sash release lever. I checked your web page and cannot find the size I need. Dimensions: 1.5" long x 5/8" wide . The broken area 3/8" wide x 3/8" long. Can you help me?

Good Morning! I am sending this in hopes you can help me with these window parts. I will be sending one more email with more pictures also.The clip on the top right side of the window is also broke ( these are pictures of the left which is ok, and the right side which is broke) . And of course the ... (cont.)

Hi,I had a tilt latch exactly like this one break and was wondering if I could replace it with an external top mount tilt latch? And do you have one that will work? Thanks

Can't. Seem to find it.

Good afternoon! We need some assistance identifying a compatible tilt latch (set of left and right). A picture is attached for review. Let us know if you have any questions. Thanks as always, Matt

Hello, I broke 2 of these (both left side, marked "L") while re-weather stripping my windows. The windows are sash style and very old aluminium. I don't know the brands. There are no marking on the windows or these parts. Hoping to find 2 replacements though, thanks! -Dave

I need some window latches part #26-228 and #26-229 6 of each