Viewing all customer Discussions for:

S395-26 26" Series 395 Channel Balance

Need six 2530 BSI Channel Balances Channel length = 26" Thanks!

Hi, we have 3 doublehung Alenco windows that have channel balancers that are stamped 25C. We replaced the glass with a heavier glass and now the windows won't stay open. We were told we needed 25D or 25E for greater sash weight. The channel is 25" long and the width of channel is 5/8"x5/8". What ... (cont.)

Original windows in house built in 1999. Brand is CWS (Custom Window Systems, Ocala FL)Window is non-tilting and made of aluminum.Balance is a channel (block & tackle) style.Metal-only portion of balance measures 26 x 1/2 x 1/2 inches.Markings on the balance : "25 5 AS CALDWELL"What SWISCO prod ... (cont.)

I would very much appreciate your assistance in identifying the correct replacement window balance. Stamped on the balance: 25 5 Length: 26" Width: 1/2" x 5/8"

Need help identifying what replacement part to purchase. It has 2540 on the balance. The metal part is 26 inches long. Is that all you need?I am not able to identify what manufacture of window I have. I need two for the window.

Hello, I wanted to confirm that I have the correct replacement part before ordering: 26" SERIES 395 CHANNEL BALANCE Product Code: S395-26 But, was not sure whether this is the 2550 25 to 28 lbs sash weight stamp. The part has a stamp showing 25 5 BSI BT (see attached photos). Is this the 2550 st ... (cont.)

I have some old biking windows the channel balances need replacing. The part # on the balance is 2840 and the measure 27 inch. Can you let me know which part # I'd the Replacement? Thanks

length 26" 25-3 Callowell JM (not clear) Thanks!

I have 2 of these they look alike but have 2 different markings. 1) 25-5 Dan cmc 7 2) 25-5 Can cmc 4

I need 2 of the balances that say 25 4 LV CMC O. The metal track on them is 25 inches long and about 5/8 wide. I need four balances that are the same but the metal track is 30 inches long, and have no stamping or markings at all These all go on PGT SH 4000 windows. I would like entire assemblie ... (cont.)

Aluminum part is 26"

Side Window track

These are from a house built in early 2004. The numbers in blue on the metal are 25 5 KW CMC 7. The back side (closed side) of the channel measures 1/2 inch. The open side holding the spring and cord is just a little larger at 9/16 or 5/8. The length of just the metal is 25 7/8 inches. Hope the info ... (cont.)

Two sizes: 21" stamped 2030 26" stamped 2530

Our tired old windows are starting to fail so it's time for new Channel Balances. The current balances are 26". Attached are pictures of the end guides as well as the number stamped on the balance, 2540 DD BSI. On the window we're working on, the block and tackle has several broken parts so we'll b ... (cont.)

Metal is 26" long 1/2 " wide Just want to conform the correct top and bottom plastic configurations 2530 stamp on railing thanks...robert

Hello. I need some channel replacement parts for Atrium windows non tilting. Please see attached photos and advise as to which parts to order for correct fitting. I thank you in advance. Tyler

I have a window that the right spring window balance broke, the measurement of the metal section is 26, there's a number on it that reads 25 9 at the lower section. The need one for each side but I don't see one for 26? I also need the right lock as well.

Help finding the correct channel balance for Single Hung PGT-4000 window please.(Window model number PGT 6SHSTKR)Existing channel balance is stamped with 25 5 BSI RNChannel measures 26" long and width 9/16"I understand that I will need the weight of the sash to make the final choice but if you can g ... (cont.)

the medal rd is 26inch long can you tell me what part i need to order plus each ends if none is all ready installed