Viewing all customer Discussions for:

S395-27 27" Series 395 Channel Balance

Hi Please help me identify this channel balance. The metal part is 27 inches long.

Need to replace both channel balancers of Master Bedroom windows. Length of balancer is 27 inches.

26 K S Caldwell. Half inch Original purchase PGT Looks like metal is 27 in Long.

Hello, I need to replace some window balancers on some 23 year old Viking windows. I've uploaded photos and the weight of the sash is 25 pounds. The Balancers are 27 inches metal to metal and 1/2 inch wide. The one end has the numbers 2690, BSI, NL, 29 on it.

The spring balancer needs to be replaced. I have 4, so i would like 4 replacements if possible. The balancer is from a 2660 single hung window. The metal channel itself is 27" long. The plastic parts add additional length. The only markings are stampings that read "2630 HH B.S.T." ... (cont.)

I need 6 window balance 2 each pictures are included 20-3 DA2 CMC 4. 21"x 1/2. Quantity 2 20 5 FX CMC 11. 21" X 1/2 Quantity 2 26-4 EA2 CMC 12. 27" X 1/2. Quantity 2

I need to purchase channel counter balance, please let me if you have this in stock & cost price

It looks like a Swisco 27" series 395 channel balance, but not quite sure. Please help as I need to order 2.

Looking for this window part for a Viking vinyl window.

need help identifying the correct replacement. Part is out of a 3'0 x 5,0 Atrium Vinyl Window from 2005.

Marking has 26 4 CX CMC 11 on both.

Hi. Need a swisco equivalent for this balance. Thanks

Side tension rod with spring. Numbers 2640. Window won't close tightly now- needs to be addressed.

Block and tackle for non tilt single hung window, stamped 26-3, metal part measures 27 inch.

Hello, I'm trying to figure out which part do I need exactly. Can you please help with identifying it? Thank you!

I am looking for replacement parts for these. The metal body's length is 27". Width in the inside is around 1/2”. The spring is 13.5" long. The white part near the pulley's measurement may not be accurate as parts of it had snapped off at some point.

I need to order some balances but im not sure which ones i need.

Hi, can you assist me with the replacement part? the metal measure 27" and 1/2" width.

I need to replace a "2640 CF B.S.I. channel balance for a 1993-ish Viking vertical lift window. Actually, I'd like to replace both balances so I don't mix old and new. the sheet metal part of the balance is twenty seven inches long, 5/8" deep, 9/16" or 11/16" wide depending on whether you measure at ... (cont.)

I have two broken block and tackle balance from non tilt windows. One has 2630 GM stamped on it and the other has 2640 EX stamped on it. I need help in determining which replacement parts these correspond to.