Viewing all customer Discussions for:

S395-28 28" Series 395 Channel Balance

Hello. I need 2 window channel balances. The part says 2790 and bsi on it. I uploaded 5 pictures. Let me know if more pics are needed. Thanks. Chris.

I need to order 4 replacement parts for a single hung BFS window. The parts are the channel that help raise and lower the window. The 4 pictures above are the parts that do not work. All of the channels have 27-4 stamped on the side of the channel. All of the hooks that were on the end of the string ... (cont.)

Sash length - metal section: 28" - including the 2 end white plastic: 29" Marking 2730 HC B.S.I. Thank you.

Hi, from your website it looks like I need a Series 395, 28", 2730 option for these block and tackle channel balances. One is still intact and the cord broke on the other one. I also need a set of what look like Alenco 5/8 sash guides. Thanks.

Stamp say 2720 BSI. I'd like to go up to a 2730. I also need to replace a set of 2740 BSI. both are 28 inches, not including the plastic parts. What are my options? Thank you.

I have a KB home built in 2000 in the Phoenix area and need to replace some channel balances. They are 1/2 wide channels, 28 inches long and are stamped with the numbers 2740 and a small JM stamped after the number. Thank you, James

Need 2 window balancers. The metal measured 28", and is stamped "2730" on the back. Thanks.

Hi,I'm looking for confirmation and availability for the block and tackle window balances which I think are your S395 balances. Based on the stamping number on the attached photo I need the following:1 pair of B15305 pair of B27303 pair of B3330 Can you please confirm this is the right product and ... (cont.)

Need to replace entire balance as pulley side is gone so string not staying in the groove. Details on part: Width - .5" Top of balance has wings Bottom of balance does not have wings Shoe depth = 1" Balance Length = 28" Stamp = 2730 BSI

Need four 27-3

27 inch metal channel stamp 27-4 and I need 8

Need help locating the correct window balance which is non tilt please pictures for reference

28 inches long

19-02 ? 28" long 1/2 wide 5/8 deep Tip is 1-1/8 long 2740 stamped on it I need 2 of these

The post is 28" long..

1/2" channel balancer. Metal part is 28" long, Non-tilt windows. Has stamped 2740 bsi on it. I'm afraid to guess any further - pics attached.

Channel is 28in stamp 27-4

Need to replace one 28" window balance. Hopefully the pictures will give you the information needed.

Len 28" (metal thingy) width 1/2" depth 1/2 Need the whole assembly (metal and white plastic end pieces) and two of the black plastic caps (for left and right side) and the pins and the special tool

Hi there - need to order balances for a window and I think I've got it right, but want to make sure. This comes from an Alenco window and the 2740 is clearly stamped. The length of the metal part is 28". I just want to make sure I get the right top and bottom. I believe I need to order 2 of your ... (cont.)