Viewing all customer Discussions for:

S395-28 28" Series 395 Channel Balance

The part is stamped 2730. It is 1/2 inch wide and 28 inches long.

Replacement block balancers on allenco window.

I need two of the 27-4 BA CMC 11 I need four of the 27-3 GA2 CMC 9 I also need 4 of the atrium window locks as shown in the photo. What's the correct part to order?

Would like to order 2 new channels. 27-4. Jeff

Hi there and happy post-Thanksgiving. I hope you had a lovely weekend! I am in need of channel balances. The spring has sprung on two of my windows. I've attached photos. Might you share your thoughts and which might be appropriate to purchase? Many thanks! Donna

My existing channel length is 28 inches, 1/2 inch wide ans has 2730 BSI DL stamped. Need to find a replacement for it. Let me know what is your replacement part number.

Markings on longer one - 2730 HB then the letters B.S.I smaller one - 1530 EG then the letters B.S.I I would need both the left and right guides for each window. I don't know if the part that the guide attaches to is there/or intact. Thank you!

Need to know the part numbers for a replacement channel balance and Top Sash Guide Non-Tilt Window 28" Length of Metal Channel 1/2" Width of Metal Channel 2730

I need to identify and replace this balance. Channel length is 29" inches.

It is stamped with 2740 HH B.S.I

Please let me know what I need to order. Will need two. Thanks, Hai

Hello. I have attached the photos of the nylon ends, hook type, and length (28"). Please let me know if you need any additional information for this Alenco window. ThanksJohn

28 inch balance There are no markings on the balance, but the window itself is marked BFS. Please provide part numbers of attached pics.

Which part would I need to order to replace 2 of these? 28 inched long 2740 stamped on both. Here is pics of both ends.

Can you help me to identify this balancer?

Hi - I'm trying to identify the following channel balance: - Length of the channel: 28 inch - Width of the channel: 1/2 inch - Marking: 27 4 ER CALDWELL - Type: Non-tilt window - Weight of the sash: 17 lbs Thank you!

Don't entirely know what happened but it just looks like one of the cords broke. They're right around 27 15/16 inches.

Hello there. I am looking to replace these two parts for my window. I can seem to pin point the series model they are. Can you help please. George

Good morning,I've attached several pictures for windows that I'm refurbishing.I have 2 sizes of channel balances I need. The one from the pictures are 28 inches long and have 2730 stamped into them.I didn't take pictures of the other ones, but the components are identical and they are 17 inches long ... (cont.)

I have a half inch channel balance number 2740. 28" long It also has a BSL and an EL