Viewing all customer Discussions for:

S395-28 28" Series 395 Channel Balance

Channel Length is 28 inches Stamped with 2740 Manufacturer was Alenco, installed in 1992 1/2 inch wide Unsure of what the clip looks like I need a count of 2 total

Need to replace both sides of the sash balance window ref 2740. Attached, please find the photos I took from it. Let me know if you have any question, thanks

I know you have several different series and I want to make sure I am ordering the correct one. The length of the metal portion of the channel is 28 inches long and the marking on it is 2740. I have submitted four pictures, two of each end to make sure you can recommend the correct replacement part. ... (cont.)

Greetings! I'm looking for replacements for non-tilt balances labeled "27-4 BW CMC 4". I think I found the right ones but want to confirm. See attached pictures.

Alenco windows circa 1993, 28" inches long, number d 2730

The metal channel is 28" long. I just can't figure out whatend fitting are installed on it I think it might be a 19-005 top and 15-001 bottom

2790 BSI, 31 lb. Looks just like your S390-28 except it needs the 19-005 Balance Top Winged. 15-001 shoe is the same as the one I have. Channel measures 1/2 x 28. I need a part number to order two of them. Thanks

Hi - I have broken window balance in an Alenco window. photos are attached. This balance (exclusive of plastic hardware) is 28" long The number on it is 2730. I recently ordered sash guides for the identical window. The model numbers for the sash guides was 18-174

what is the difference between 2730 and 2750. Mine has 27-3 stamped in it.

metal part is 28" end to end stamped "a 2730" Thanks

Looking for a window channel balance 27-3

Please help me identify this window channel balance. The length of the channel balance is 28 inches. Thank you!

Metal body of balancer is 28 in Long

Not sure of brand and need to order to balances. Stamp is 27-4. Not sure if slotted end was made over time or manufacture. The hooks came off but look like the attached pic. Thank you.

This is the part number stamped inside our balance.

The length of medal pole is 28 inches which has a f 2740 dented marking on the bodyI am trying to find the matching part to order on your website. Thanks Shirleen

It's labeled 2730 BSI. 28inches long.

Hi - I'm not sure which part to purchase to replace this channel! It has 2790 FK 31 stamped. The metal portion (excluding the plastic ends) measures 28 inches.

Stamped 2740 Metal channel is 28" Overall length is 29" Scott

I have these windows and need to order several new balances and the little cap at the top corners of the windowsThank youPeter