Viewing all customer Discussions for:

S395-28 28" Series 395 Channel Balance

I didn't include the picture but the width is 1/2"

What replacement would you recommend for this? Stamped number is 2740. Thank you.

Please provide the cost of two (2) window sashes which will replace these. Thank you! Gordon

T want to replace my window sash, length 28 in part# 2730 HC BSI, and the take-out clip to go with it. Pictures attached. Thank yo for your help

Hi I would like to know what replacement window balance I should buy.

Could you please provide replacement parts? Marking on the balance. BSI L01 2740 Measurement Length 28in. Width 3/8in height 5/8in Thank you

Hello, I am looking to identify the right parts to replace a 27 4 EW CMC 10 - the string seems to be stuck somehow and I am too cautious to try and right it assuming the spring may release its tensions in one quick go. Any help is much appreciated - thank you!

I need 6 window channel balances to replace part number number 2740 on alenco window. The channel measures 28 inches. I have included photos of the shoe and top. Will also need takeout clips.

Looking to see f you carry these window balances please Thanks Vito

I am needing to know what I have in the pictures so I can purchase new ones. Please see added photos and let me know my options/part #s etc. Note there are two different parts for two different windows but they are made the same way. There is only one pic of the one with code 2730 and it is a BSI (W ... (cont.)

Hello, Here are 2 pair of springs I removed from 2 windows. They're 1/2 inch wide by 28 inches long (not including nylon end pieces). What part numbers do I need to replace them? Thanks, Justin

Please see attached pictures. The stamps are 27 4 lv cmc 7 and 27 kv cmc 7 respectively

Here are photos of my up/down window channel balance. 28" length 1/2" width 2730 stamped (next to the former 4 numbers in smaller lettering/number reads DB G02 if that means anything. How much is one of these balances? Thank you.

I need channel balance replacements for single hung (up/down) windows (non-tilt). The metal portion is 28" and the only stamp on the rod is 2740. I've attached some photos for your review. Please let me know what I need to order. Thanks.

Hello, I need to order for window balances and four of the caps that go on the top of the window that hold the balance in.

Looking for a replacement for my window balances shown here.

Need help in finding the proper guides. Windows are all the same height from frame to frame edge. The top side is pointed with tiny wings. The bottom. Edge rounded.

From all the details it looks like I need a 28" Series 395 Channel Balance. Can you confirm looking at these photos? The metal measured 28" exact. Thanks!

I took this off the right side ( from inside of home looking to street) of a non tilt metal dual pane atrium window. The window will not lock. seems to be 1/8 off from latch catching.The latch on the movable window needs to go down about an 1/8 to catch or top window up 1/8" " I checked the fixed w ... (cont.)

Hi Folks,Please take a look at the photos and let me know the part I need. I will need 12 window sashes. Thank you.Ken