Viewing all customer Discussions for:

S395-35 35" Series 395 Channel Balance

I need 4 or more of these please

hi these are 36 x 1/2" wide x 1/2 inches long with lettering 34 3 CMC 7 I will need about 24 of these.

Channel marking: BSI 3440 Channel width: 1/2" Home built in 1996, most likely original windows

I have several non-tilting channel balances to order & replace and believe these are Series 395 Channel Balances. However, due to the quantity I want your professional confirmation so I order the correct balances. Metal channel width is 1/2"-9-16". Markings on 3 different sizes are: 23 4 DQ CA ... (cont.)

35 inch sash balance 3440cj AM Need 4. I have 3 windows in our Florida room and the one we open had sash balances replaced in April 2022. Both balances broke

The spring broker on one of my window channel balances. I am looking to replace both channels if I can. I took a look at a few youtube videos and it looks like something I can do. (I took the window out and took pictures of the working balance).

Can you provide the correct part number ? Metal portion of balance is 35 inches.

Both half inch 34 - 3 Fx cmc 7 28 - 4 gx cmc 11 all same end fittings on both sizes

My balance has the model number as 3420 on it. Do you have ?

PGT window from 2000 or 2001. Length 38" appears to have stamped 34DS 38. Attached picture. The cord was broken and the hook is missing. I need (2) one for each side of the window.

Window Channel Balance, hope this is enough info and I need 4 of them... Thank you

Looking at Your website and I believe that I need S395-35 option3440. Can you confirm?

Good morning,I need four 2830 sash balances for Viking metal windows. Attached are two photos each of each end (four total) plus a photo of the inscription "2830."Can you help me?RegardsPat

Good morning! I have four Viking windows and all four need new sash balances. I hope you can help us. Two of the windows each have two size 3430 sash balances. And the other two windows each have two size 2830 sash balances. Both windows use sash balances with identical nylon guides. I've attach ... (cont.)

Can you determine replacement?

34-4 KX CMC 7 is the stamp on the balance. channel is 35' long without the plastic end pieces... Thank you

PGT window channel balances. Length is 34.75"

Hi I need replacement channel balances for a few windows. I attached photos. Note that the code that's printed is: 34 3 IV CMC 7 The length of the balance is: 33 inches.

Side load single hung balance springThe metal part is 32 1/8" long. It has a 31 3 HW CMC 7 printed on itThe spring end has a plastic tip that is 1 5/8" long held in with a rivetThe bottom plastic piece is 1" longWhich Swisco balance spring would be a direct replacement for my unit?Thanks,Bill ... (cont.)

The window channel balance is 35 inches long (excluding the parts at the top and bottom). The part number stamped is 3430