Viewing all customer Discussions for:

26-244 Tilt Window Latch, Right Hand

Looking to see replacement part

Do you know what will replace these?

Please let me know if you have this part whose top piece used to slide the latch is broken

I believe these latches are from a Thermal Guard window. The overall length is slightly larger than 3"

There are two part The title window which is internal The window stop to keep the windows from being raised past a certain level I need this part ASAP, has the house is sol and I need to repair my 12/8/2018 Thank you

Pat. # 5.139.291 also has a 75 and A

I am in need of a window lock and ten tilt latches for vinyl replacement windows with PRISM stamped on the locks. Are you able to identify the parts I need from these photos? Thank you.

These are offbrand windows with no labels on them

Please help identify the parts I need to order. The tag on the windows shows they are from Norandex and are Simonton windows. The bottom moves up and down and the top is stationary. On two windows both covers or supports for the spring or coils are cracked--one window far worse than the other--but t ... (cont.)

Looking for part number for Tilt clips for Series 78 SH Tilt

Picture of left side of window shows small triangular piece that juts our. This holds the left side of the window in place. Picture of same window right side does not have this piece. Part of window on is not secured in place. This is the part needing replacement,

Do you have this tilt-latch in stock? So the existing tilt-latch is about 3 1/4 x 5/8. Thank you United Glass & Architectural Metal

New crank for window whole mechanism. New tab to till window out. Doesn't lock in properly. New springs so window stays open.

I appreciate any help in finding a replacement window latch.The part has the dimension of:2 & 5/8 in. Long top/outer piece that rests on top of the window (visible once installed)3/4 in. Wide top/outer piece that rests on top of the window (visible once installed)1/2 in. Wide inside (portion tha ... (cont.)

Broken

i have several Simonton windows installed throughout my house and i'm in need of multiple parts identified in the photo attached. I'm also looking for window balances for double hung windows.

Need to replace this part (window latch for silver line product ID 2901)

Hi, every window that opens in my Centex home that was built in 1999 needs parts. I need new springs to help open the windows and tabs to allow them to tilt open. I believe the springs are called cross bow balances. 2 x 23.5x27.53 x 27.5x2812 x 27.5x322 x 31.375x37.54 x 31.5x32ThanksKen ... (cont.)

Need one tilt latch and 2 coil balance for window.

The windows are 19 years old and the majority of them have at least one side broken and it seems to be in the same area. I have no idea from your parts pictures exactly what parts I need. Thanks for your help.