Viewing all customer Discussions for:

26-244 Tilt Window Latch, Right Hand

I am looking for the latch in the attached pictures. 2-5/8" x 11/16" x 3/8" I see one that is similar 26-393 but the picture does not show all angles. Any thoughts?

Could you help me identify this tilt latch? The latch is disintegrating, so I glued a piece of plastic to the top to be able to remove it. I included pictures of a second latch to show what it looks like not still intact.

Looking for replacement tilt latch for Simonton window, installed ~2002. Latches slide in top corners of sash. Measurements - 2 5/8" long, 11/16" wide and 3/8" to 7/16" deep. Need beige color. Better photos can be provided if needed. Do you carry? Please provide part numbers. Thanks ... (cont.)

It holds the window closed No markings to show

Hi,I'd like to order the following window parts:(2) tilt latches(2) sash locksProduct ID 2900Size 32x62Silver Line 8002344228See attached photo of parts and warranty label.The parts corroded from sunlight. The window is 13 years old.thanks,John

75 PAT #5,139,291 7H

Need to know what this is, and where to buy.

I need a pair (right and left) of replacement tilt window sash release levers. There is no brand name on the window. The part says "Pat. Pend." It is 3-5/8" long, 11/16" wide and 3/8" deep (the part of the plastic that fits into the window, with a little lip left sitting on top of the window). ... (cont.)

Trouble finding this part

Need replacement of this product I need these 4 left an 4 right numbers on back of product is (075. Pat#5.139.291)

Hello this is a tilt latch idk which one I need or what windows I have. The AAMA says series 96 H-R30-44x72

Need left and right tilt latch for: Jeld-wen purchased 2007 Tilt latch pat.# 5,139,291 (slide in latch) 2 5/8" long X 11/16" wide X 3/8" tall (+1/16 for top lip) I think the 26-243 and 26-244 are the closest match; only difference is the lower snap is set in 1/16" on my latch. Please get back to me ... (cont.)

The lever on one of our sash window catches is sheared off. See one of the photos for a label from one of the windows which I believe identifies the brand (STILES)? The other photo is of subject catch. We measured screw centres to be 2 1/16" apart. I'm assuming a complete catch replacement is requ ... (cont.)

Hi, I cannot find these parts for my window

Hello, I need glazing bead, latches and some help on how to get the retractors un stuck. Any help is appreciated. Thank you

Am looking for this locking mechanism but I can't find it on your website

I need a left-hand replacement latch for a Window World vinyl double-hung tilt window. Unfortunately, I'm unable to find any other identifying marks. The latch itself measures 2-5/8" long by 1/2" wide, and the nose is 1/2". Thank you!

Have a window with a broken balance as well as some broken tilt latches. the attached photos show the labels and as well as i could get the balance and latches.I haven't seen this type of balance before. It looks like I may have to cut the channel to get the balance changed(?).ThanksBill ... (cont.)

2 5/8 X 5/8 I don't know what brand the windows are. Which latches should I get?

Tilt lock latch 2 5/8 long 3/8 thick 5/8 wide lock does not protrude below bottom