Viewing all customer Discussions for:

26-244 Tilt Window Latch, Right Hand

It is spring-loaded push it to the inside and you can pull the window open

Is it possible to purchase entire window with latches. 31 1/4 x31 1/4 inches?

I am looking for a white left replacement tilt latch for a Silver Line window that was installed in 2020. I have the following description of the window- 2901, single hung unit size = 30"w x 54"h RO size = 30 1/2"w x 54 1/2"h nominal size = 26" x46" standard, white, low-e, argon, PG35 - DP 50/50, ... (cont.)

Need 6

Hello, I have several vertical sliding windows with failed tension spring that won't stay open. I removed the windows and found flat springs and window shoes broken. The windows are single hung with total height of 70" (2x35") and 35" width. The window channel where spring is located has 3/4" openin ... (cont.)

HI, I cleaning my windows and two latches were dry rotted and broke. they are under patent 5.139,291. There is a number 092 also on the back of it. I am attaching images. thanks

Locking Tab Dimensions are 2 5/8" Long by 3/4" Wide by 9/16" thick. Markings include 092 on the tab that locks the assembly into the window, patent number 5139291 and 7A. I have attached pictures of 3 views of the locking tab.

I'm looking this replacement parts

I am looking for a tilt latch for a Carefree vinyl window. I am attaching a few pictures. The latch is 2 5/8 in length by 11/16 width. Opening for the slide tab is 1 3/16 by 3/8. The latch itself that catches the window frame is 1/4 thick by 9/16 width. The top of the latch assembly sits about ... (cont.)

Hi, I'm inquiring about a window latch I'm trying to find. I attached the photos. Thank you.

I am hoping to find a part number to replace a top window lock. I have one on the left and the right top of my tilt windows.

Window brand not known The end piece that protrudes into the grooves on the side of the window of the frame is broken and not visible in the picture I didn't see an appropriate replacement in your gallery of replacement parts Any suggestions?

Just want to order the right one

House built 7 years ago. We never opened the windows. Have found several with broken latches. Have uploaded window manufacturers label, dimensions, and 2 pictures of latch. Thank you for the help.

My Syminton window will not close on the right side (from the inside looking out) the piece that pushes out to latch has snapped off

HelloWe need to order a bunch of the window "dohikeys" that allow you to lean the window out to clean it. Attached is photo. Our Portland Glass company said part # is 28CBS1. Might be called top tilt latch pair??I measured the rectangular latch. 3" L x 3/4" W looks likeDo you have? How do we order?T ... (cont.)

I ordered surface mount tilt latches from your company years ago. I need additional replacements but can't find the same ones I purchased previously. In the picture is an original latch (tan color because of UV damage) and one of yours. The bottom side width is 9/16" The top face piece is 2 5/8" x ... (cont.)

Which part do I need to buy to replace this tilt top latch?

Good afternoon! I've attached photos of the window tilt latches, along with information that came with the windows. I purchased the windows in 2006. If you require any more pictures or information please let me know. Thank you for helping determine what part I need! May you have a wonderful wee ... (cont.)

Hi. Attached with an earlier email? I need window latches for same windows Opening is 1/2" x 2-9/16. Latch is 1/2" thick Also need some type of cover for the balances? The cover in the last photo (an s profile) is 1-1/4" wide and 34" long on average, but we can cut these? Thanks