Viewing all customer Discussions for:

26-244 Tilt Window Latch, Right Hand

Please let me know what other information might be helpful to identify replacement parts for these. Thank you-Dennis

Need a three left hand tilt latches and three right hand latches. What do I need to replace the broken ones I have? Latches that broke are about 23 years old. Size is about: Length= 2.60 bottom, 2.655 top Width=0.70 top, 0.565 bottom curved portion Height=0.425 inches. Thanks.

Not sure of the window manufacturer, they were installed when I bought the house long ago. Am having trouble finding tilt latches that work with it. Do you have any that would work? The problem seems to be how they snap into place. See the side shot. Can't find any that have a similar mechanism. ... (cont.)

I see a similar latch on your website with identical size but the piece I have is all plastic and doesn't have a metal plate on bottom with screw hole.

I need 5 right to left tilt latches and 3 left to right. How can I order them? Can cost

Can you help me find the correct replacement latch for my window?

Basically, I found the 26-393 - Tilt Latch Pair which works perfect, except it is 4-5 mm too short in the body length portion. I would love to exchange these for something that works better.

I have attached pictures of the tilt latches and spring assemblies for a window i have. I also attached picture of the id tag from the window as well. I need 2 latches, springs and the plastic holder for both sides as well as the pieces the springs attach to at the bottom. Also need pieces to go on ... (cont.)

Hello, I've attached a set of pictures of the internal latch that has a broken end. I will be replacing the latches in 6 windows that are of the same model. Thank you, John

Missing the triangular latch tip in photos.

We have older windows from Comfort Window where the sash lock/guide is broken. So now when the window is open it falls because the tabs that ride the rail up and down have broken off. Thank you Jerry

Pat. 5139291 white slide in about 2 1/2 inches long ,1/2 wide, 3/8 thick

I need a pair of replacement tilt latches (right & left), for a double hung vinyl window made by Window World. The size is 2 5/8"L x 11/16"W, the markings can be seen in the first picture.

The left and right sash tilt latch is broken. I have CertainTeed windows (single hung). I need to buy the left and right side of this part. Thanks!

Hi, If I am facing the window this is on the left side. Maybe this picture will help ! Thanks

Certainteed windows Need to replace tilt latches. Need to know what parts I need and how to replace

Simonton Balance Assembly and pivot bar for single hung Simonton windows apps 22-23 years old and plastic (almond colored) tilt latch

Looking for replacement Tilt latches left and right. Windows are 24 years old. Do not know manufacturer. Bottom has letter K and there is a number on the snap .092. Others have the letter F and others the letter J. I measured this as: 2 5/8" long 11/16" wide Opening for latch is 7/16" The latch ... (cont.)

Markings on it are a large J, the number 75, and a Patent #5,139,291. Thanks for your help!

Good afternoon! I have three of the same-sized double hungs (regular Low-E w/ GBG) that the bottom sash weighs exactly 20 pounds. Including original order number from 20 years ago. I have attached a picture of the tilt button, spring, and tilt assist. I ordered the tilt buttons, but as you can ... (cont.)