Viewing all customer Discussions for:

26-244 Tilt Window Latch, Right Hand

The ProFinish windows were purchased in 2000. I need one replacement tilt latch for the RIGHT side.

Need replacement hardware for KVw tilt single hung 20+ Years old can you help? Looking for complete repair kit for these windows.

Hi, I have single hung windows.Series 3000 SHAAMA/NWWDA101/I.S 2-9H-R25-46X68 I need balances and clips.The sash weights 18 lbs, and balance length is 26.5 inches. I believe I've pick the correct ones, but wood appreciate your help.Thanks, Larry

Do you have same type of tilt latch

I haven't been able to find this kind of latch. I need about 6.

We do not know the brand of window seems to be an older budget type window. These seem to be a little more narrow and smaller than most. Dimensions 2.5 inches long 0.5 inched wide and 3/16 inch high. Aside from the dimensions, the small tabs on the sides seem to be unique for most others.Thank you, ... (cont.)

I am looking for the two latches to this window to keep it in the track. I am not sure of the make of the window.

Hi! The coil balance(s) broke inside the window frame. I believe I need a 15-111 shoe. The attached coil has a stamp 5.5 35" The unattached coil just has a 3 stamped on it. It is a double coil system. They are 1/2 inch wide. Also, the latch is broken. I believe I need a 26-243 left and a 26-244 r ... (cont.)

Several of these window hardware pieces (I'm not sure of the name of it but the part keeps the window in place) have broken over the years and I cannot find the replacement. I bought the house with the windows installed and am not sure of the make.

I'm looking for these particular window sash feet and the tilt locks as well. The feet appeared to be nailed or riveted in place.

Hi I am looking for a replacement for this latch. Please see photos attached. Please call with any questions. Thanks! -Josh

Hello, We are in need of about 6 or 8 of these window tilt latches. Would you happen to have this style? Thank you!

Can you please identify the part number needed to replace what's in the picture. This is the right side tilt latch.

Hi - I need to replace the latches on our Kinro single-hung tilt windows. The marking on the back of one (broken and removed) shows L-12 59 as an identifier. The ones we have are 2 5/8" long, not 2 3/8" like the ones you offer. These widows are original to the 1996 Liberty manufactured home. Wil ... (cont.)

Please confirm tilt window latch #26-419 & 26-420 will fit 15 year old TRACO windows. The dimensions appear to be in-syce with your schematic drawing. Thanks - Dan

One of the things I notice is that they have a 1/4 round cover over the Spring location that I do not see on other windows the two side releases are shaped to Tilt latches-fit over that instead of straight. I would think your straight ones might also work if you did not have this particular one. No ... (cont.)

I'm inquiring to see if you have left and right pivot pins for tilt in windows for the brand: Oran Windows. I noticed someone inquiring on your website a few years ago about this and I thought you might have sourced a part for them. We need a number of them. Ours have snapped off and our windows are ... (cont.)

I need to replace the pair of balancers on the vinyl window pictured. The lower window sash window is a double pane 38" high by 29" wide. The balancer is 1 1/4" wide and the travel distance is about 34". Do have anything to replace the right and left side? It is a double coil balancer on each side ... (cont.)

Can you identify this part?

Hello, I looking for a few set (left and right) of window parts. Do you carry them? I would come to pick up anytime in Halifax.