Viewing all customer Discussions for:

15-001 Channel Balance Shoe, 1-1/8" Depth

Balance is from an Alenco non tilt window. The length of the metal is 34 inches. The width is 1/2 inch. Stamp shows on balance says 33 3 FN CALDWELL

Looking to replace some BSF window Block and tackle channel balances. Description: metal channel is 28" long and 9/16" w x 1/2 " d only stamp I found said "27-6" Thanks for your help.

Could you please help me identify the type of balance spring I need? On it, is stamped 28C, and I think U.SB On a more recent replacement part, it is written in ink: 11/07Unique 28-B-20. The metallic part measures 1/2'' x 29'' Thanks!

Please identify this

trying to identify this channel balance for a non tilt sash window.

I have a Viking window that has a 24" channel balance, with a winged top, but a non winged bottom, as seen in the pictures, will the part number S380-24 work with both winged top and bottom if I replace both? Also the stamp option indicated is a 2390, and the highest option on the order form is a 23 ... (cont.)

Hello Swisco, How can I distinguish the 29” 2830 Series 390 Channel Balance from the 29” 2830 Series 351 Channel Balance? From the photo on your web site it appears that the only difference is the 15-001 vs. 15-002 shoe. How can I distinguish them, they look alike. I have attached a photo of ... (cont.)

We have aluminum windows in our house. Most of the vertical windows are very tight and in some cases you could see the balance in side rail. Additionally some of windows are cocky when you try to move. I picked a window which was relatively straight but tight, and spray WD40 in the guide. That windo ... (cont.)

26 3 FR caldwell , Viking window from 1996 ?

The window balances are 24 inches overall length and are 1/2 inch wind. They are stamped with the number 2330. Can you please help to identify what to order. I need two of them. The window brand is Viking. Thank you!

The window balance is 32" long and .5" wide. I need 14 of these. There is also a stamping on them that says HD193. Please reply ASAP Thank you Dave

i am a gen contractor with limited spring balance experience. i have watched the videos and have learned a lot. i need three balances to replace broken ones. two of them say "2790 FK 31" one says "2740 bs LH" all three are have broken internal or other parts, i prefer to replace whole bal ... (cont.)

I need to replace the channel balances and the top guides in a window down here on Anegada, in the British Virgin Islands. The balance is marked 2440 BSI. I believe that I have found the replacement (your series 351). I am attaching photos of the balance just to make sure. I will put photos of th ... (cont.)

I need to purchase channel balance for NuPrime Seasonall non-tilt window. The length of the channel from one end to the other, not including the top attachment and bottom shoe, is 28.5 inches with marking 2820. The one closest product is S390-29 based on measurements of the shoe. Attached are ... (cont.)

Alenco is the name on the window lock. Channel measures 9/16" so would be considered a 1/2". Length of metal channel is 28 1/16". Stamped on the metal is the number 270. I'm not sure if I've used the correct angles to take the pics of the parts from for identification purposes. Please let me know an ... (cont.)

the metal part of the balance is 27" long, 1/2 " wide,it has the markings 2640E (the E is backwards as shown in the picture)and the small letters B.S.I.. and in handwriting milgard 2640

trying to figure out which one i need. the rest of the measurements will be in the next email.

Pleas let me know what you think. I will need two. Also this window frame DOES NOT have side clips so I'm not sure how re-install these balances. Any ideas?

Hello, I'm trying to get this counterbalance, but unfortunately I have no idea what the brand is. My window is missing one I would appreciate your help. Thanks, Edgar

1/2 inch balance need to replacement four. I believe 26 inches in length.