Viewing all customer Discussions for:

15-004 Winged Channel Balance Shoe, 1-3/32" Depth

Stamp is 36 4 CALDWELL JM The metal channel is 37" Bottom shoe is approximately 7/8" 1/2" Channel Balance Need to know the Series 380 or 385 or other. Need top guides for this window.

27 inch Markings read. 26 4 go cmc 1 Wasnt sure if i need 15005 for bottom and 19005 for top

Hello, I have this window balance from an Empire Pacific EPI window that is about 12 years old. Please advise on what to order & I will happily purchase from you guys. Thanks! Devin

This window was installed about 24 years ago. The metal portion of the balance is 30" long. The marking is 2920Y. I will need one for each side of the window.

Hi, it appears that I have something close to the 30" Series 380 Channel Balance with option 2930. The house is around 10 years old. The markings on the channel balance are "29-3 CA2 CMC 4". I measure the channel balance (metal only) at 30" and a width of 1/2". The window weighs 20.2 lbs. I m ... (cont.)

Marked: 2520 BSI Windows: Year 2001, Window Master Series 600 Retrofit Style: Vinyl Single Hung, stationary top sash Width: 1/2" Length: 26" (NOT including the ends) Can you provide the replacement part number so I can order 4 of these! Cheers, Norbert

I have tried sending this to your discussion section but have heard nothing back. can you help?? I have attached photos for what I am looking to replace marked 2430. The length of the channel balance is 25" width 1" depth 9/16 to 5/8 This is for a Window Master series 420 I was looking at the ... (cont.)

S385-27 : 27" Series 385 Channel Balance option: 2630 The window weights 18.4 lbs I've recently purchase 2 of these Channel Balance and installed both to replace to ones I have on the window. After I pushed the window down into the closed position, the window sticks very badly whe ... (cont.)

I need to replace some window balances. The ones currently installed are Caldwell. Looking at the pictures of the ones in the catalog, the 380 or 385 appear to be the correct ones. I can't tell the difference between the two - the heads and toes both look the same, but I'm sure there is some diff ... (cont.)

I believe this is the part I need to order, can you verify from the pictures? The length of the Channel Balance without the plastic ends is 27". The stamp on the side is 2640N. Thank you. Kristi

I am trying to identify this spring. It has 26 9 AW CMC 2 on it.

After going over the information on your site , I believe I have identified the balance that most closely matches the one I need to replace The pulley cord broke). However before ordering this item , I wanted confirmation that it was the proper one- it looks like a 385 series but I don't want to mak ... (cont.)

Hi, I have about a dozen windows that need the balances replaced. I have included pictures of my current balances. The window measurements is 35" x 58.5". I did measure the metal rail of the balance and it was 35" x 1/2". I narrowed it down to series 380 or 385...I think. Can you help determin ... (cont.)

Hi, I'm looking for a replacement spring balance for my window. The length of my old spring balance is 32 inches. Feel free to contact me if you need any additional information or pictures. Thanks.

I am trying to identify which channel balance I need to order for my windows. I have included 4 pictures of which now pic contains the stamping on the channel balance. I hope you can help me to identify the parts I will need.

Need 2 of these.

Dear Swisco, Can you determine whether the shoe in these pics is the 15-005 or 15-004? Based on this, I have determined that I need either the Series 380-30 or 385-30 channel balance. Thank you.

Hi, I have a slider labeled 32 5. I believe it

window # 1 32 9 EV CMC 2 window # 2 26 5 EU CMC 2

Hello, I need few balances for Milgard windows. I removed one of them. Pictues are attached pictures. It is Non-Tilt Window. The channel width is about 1/2". The height of only metal frame of balance is about 27.5" and with plastic attachments is about 28.5". Are these available and how much for tw ... (cont.)