Viewing all customer Discussions for:

36-048 2-Bar Hinge Set, 10"

HI, I would like to replace the cranks with folding casemate arms. Do you have a product or know of anything custom that would work?

I need all three parts. the arms and that independent support arm.

Need replacement parts for casement window. 1st pic, bottom part with no identification on it. 2nd pic, top part with numbers 40942. Can you help me out with a replacement

Hi, The other side of casement window bottom hinge is broken. I am looking for replacement the same hinge. Thanks,

I have a crank that is worn out I believe it to be 9887P it is white with truth stamped on a part It may also be a 0887P or D it is a left hinged from the outside Window is approximately 21x42 Screen is 18x40

This part is on a MW window.

I need the lower arm on the window crank system that I circled in yellow. It doesn't appear by your website it comes with the Entry Gard Truth 39-156. Thanks in advance for your help. Roger Vaught

Do you have replacement parts to fit these?

These are parts that I am looking for: 1) photo is of my slides which measure 16" aluminum only 2) #6 awning cranks which were almond or beige 3) hinges for these same awning windows 4) locking mechanism for awning windows I would love to source these parts and if stainless is an option I would like ... (cont.)

The second picture is the slide that is broken in half, and the firstPicture is the opposite side that is not broken. I believe it isthe right hand side that is broke. I will need instructions to takeout the old broken part, and reinstall the new one.ThanksRobert

I need 2 complete bottom pivot assemblies for 2 casement windows, 1-right hand and 1-lefthand. All I have at this time is this 1 picture and "trust" inscribed on one of the pieces.Any help would be greatly appreciatedThank youScott

The part on this Roto Window G2-STRKR-#37 is rusted and broken. Once window open it will now not close.

Truth sash window, need new control unit to open/close Window is 31 3/4 wide 15 3/4 tall

I need the left and right arms(?) as well as the lower handle/opening mechanism. The operator looks like this one from your website but the handle is white. I need two crank type operators and two 'handle' (like in the picture) type operators. The crank type does not have a handle but a metal squar ... (cont.)

Hi I am looking for a replacement piece that has snapped off. I took a picture from another window and it has roto written on it. I have no idea what that piece is called but it has also a letter A on it. Any assistance is greatly appreciated.

The black piece is broken that attached to the window to slide when turning handle. Truth 30744 is on the piece attached to the longer piece. The longer piece that has the black part attached has # 31133. The piece by itself has 30752-B. I also need 4 handles that has Crestline on it. ... (cont.)

This is the left casement window which is currently working, the right side window the corner slide( which is secured to the corner of the window has broken off the bracket due to rust, I need to replace the entire hinge bracket (top/bottom with slider but do not know the brand of window, or correc ... (cont.)

I need replacement operators and hinges for two casement windows, one right and one left. Do you carry what I need? Which ones?

On the back side of the casement arm, it is stamped" 30-473 RH.the longer arm is 9.5" and the shorter connecting arm is 4.5"I need to order the complete window casement crank setup , for both the bottom and top parts. I do not need any locking hardware.I estimate this was purchased and installed a ... (cont.)

need RH casement hinges, with other parts that may be needed with this, as well as mounting hardware (in SS if possible)