Viewing all customer Discussions for:

36-048 2-Bar Hinge Set, 10"

Looking for a Casement Bottom Hinge Assembly, that a customer threw away. I have the corresponding Top hinge. The stainless track has the number 40941 stamped along with the words "PRY TO REMOVE SASH" and an arrow pointing to the pivot. The Sash arm is painted Beige with the number "31133C" stamp ... (cont.)

I need both the top and bottom of these guide arm studs and maybe the guide arms themselves The part that goes on the window frame is bent as well as the clip part This the window gets stuck and doesn't open /close properly

it is from a Stanek window, which is obsolete

hello my name is Justin. I have the casemount where the handle came off the mount. I was planning to just change the case mount. Do I need to buy the window arms too? Also, if i just change the case mount, can i still use the old window arms. thank you

Hello, I need to identify the part in the second/middle picture (Also circled in the first picture). It's the metal piece that attaches directly to the bottom of the sash. The rivoted swivel piece attached to it has a part # of 31229. It all seems to be Truth hardware. Are the right and left handed ... (cont.)

I have a lock handle that has broken off aswell as our lower rails on 2 windows have rusted out and no longer allow us to fully close the windows nor open the windows. Are parts still available for them or anything? I can provide pictures in emails or texts if need be.

I need a replacement bottom hinge for a Caradco 60x20 casement window that is about 30 years old. The slider bar section measures 10". The window is hinged on the left side (when looking from the inside). I have included photos of the old hinge and the corresponding top hinge. Thanks. ... (cont.)

Andersen window 14 inch hinge set top and bottom for both left and right side

Do you have this hinge in stock?

Trying to locate where to purchase replacement hinges. Left hinge has a part # 6DD05 and right has part # 6D206. Can you please help identify them and where I can find suitable replacements? Thank you. Rebecca.

Left handed operator. ROTO window Model number HG04 2006U.

The hinge pops out of the slide. Missing button that holds the window up.

The brand of the casement window crank assembly is Truth. The part that is damaged is the black piece and attached metal glide (shown in photo) that ties in the lower hinge of the casement window to the installed to the track appears to be damage/cracked due to use. It jumps from the track. The b ... (cont.)

This is an awning window and i cant find the replacement side arms for this. i found the crank but i havent had luck with this. If you can help that would be great. The arm seems to be approximately 7"

I am needing what I will call the pivot shoe (and arm?), and the metal strip that attaches to the top of the window. The Picture shown IS NOT the part. (My ladder wasn't tall enough)The picture is the rail mounted on the jamb where the shoe slides. It is 10" long with a 6" lower lip. I was able to ... (cont.)

I have a Silverline casement windows 70NCW1 and it came with standard hardware (marked 31858) in attached pictures, but i need an Egress hardware to make it open at the edge instead of sliding closer to center. Any suggestion what will be egress hardware for that window?

Help identifying

need to replace complete mechanism. looking out the window from inside it swings to the right. Please help and thank you in advance

Casement window hinge has Bilt Well stamped into the hinge. The hinge slide track is about 8 inches long. The bar that hinges from the plastic slider and fastens to the window 8 1/2 inches long. The pivoting bar that fastens to track to the window bar is 4 1/2 inches long.

Please provide assistance Pictures 2 and 3 are lock latch broken off. Pictures 4 and 5 are of the gear box, it is not the crank that is malfunctioning On arms/scissors mechanism is printed DELL MAR TORONTO same mechanism has TRUTH printed Please see photo 1 The windows are older than 10 year ... (cont.)