Viewing all customer Discussions for:

36-049 2-Bar Hinge Set, 14"

I need replacement hardware for these awning style windows with Truth hardware. I'm not sure of the age but my guess is they are 20-30 years old.

In the pictures you can see where the arm came off that closes the window. The I clip broke off along with the pressed pin. The arm is still there but I think I need the triangle looking hinge that has the pin in it.

I need help identifying these parts for an awing window.

I need the left and right hinge assembly, including the hinge arm, hinge slide etc. for two (2) Simonton vinyl awning windows. Sash size is 22x34. Also need new tie bars for both windows. All parts need to be stainless steel as this is a beach house.

Hi, Thank you for looking at this. Can't find any markings or numbers. The part at the end of the gear levers will not stay attached to the window. Thank you

These windows were made by Slocomb industries, the hardware has truth on it . They are approximately 17 years old. I need 5 sets of hinges for them.

I need a crank handle only and the top and bottom arms for an encasement window

We need 2 operators, plus 1 hinge for Milgard windows, the operators are 5" in length

three pictures of the crank window the metal clip pictured with B isgood.What is missing on the A side of the window this clip. I need replacement part for this the US pat. number is pictured let me know if you need further information or can provide the replacement part. thank you ... (cont.)

I'm pretty sure the picture has a left and right arm although I'm not sure which is which. They both have the name truth and a number of 33177A. On the other sides it has the #31133C and the other has a #31133 B. Can you help me out? Thank you!

I need the part that is unattached sticking out away from the window. I will also need the part on the window frame it is attached to as well as the part on the bottom of the window it attaches to. The window is roughly 26" by 56".

This is from one of my egress windows. It should be a Truth part. One piece of the hinge has a rust corrosion on it. I am hoping to find the right replacement. Thanks a lot.

My casement window left hand side hinges was broken as pictures There are pattern number on hinges US Pat 4980947 Please help to find the right parts for replacement Thanks

I need to replace the right and left hinges for a Caradco Heritage 1 awning window. Number on interior of awning window: Caradco-916 (glass spacer)

I need the hinge for this casement window. the number is "HG04-2002" any help with this would be greatly appreciated. thanks

I found the replacement operator but need help finding the other bracket and the top and bottom hinges for this window

Window will not close all the way unless we lift up on the top inside and continue to crank close.The black piece in picture is still there but broken This is a pic of the window part on the other side of it. I'm guessing the broken part is what is not making it close all the way. It has a # 3152 on ... (cont.)

Looking for replacement hand crank fir casement egress window Series 8610 C-C40- 36x72 (modif)

Purchased windows around 2011. We only need the part circled in red x 2. The part we need is 10" long. The hidden track is 13" long. Thank you!

Hi, We have a slider on a 20+ year old window mechanism that has split in two making it such that the bottom corner of the window doesn't fully close. I have identified within the accompanying picture all the part numbers/text that I could find on the surrounding components. Any help in identifying ... (cont.)