Viewing all customer Discussions for:

58-170B Foam Filled Weatherseal,12ft

We need replacement weatherstrip for Gorrell vinyl casement Windows. There is printed Q-LON on the weather strip The weatherstripping has a vinyl covered T shaped , rigid plastic part that slides into a 1/8 inch groove along the outer edge of the frame surrounding the glass. The slide in tang ... (cont.)

Hello. Hope you are well and safe. The photos above try to show a weatherstripping if roughly 3/4 inch when uncompressed. It is from a Del Mar casement window. Any help would be greatly appreciated God bless Mark

This gasket has a foam core and is encased in a soft vinyl sleeve with a molded lip that would slide into a channel in the lower sash of the Patriot window. These windows were installed in my new home in 2001.

I need replacement weatherstripping. Diameter of the bubble is roughly 3/16." Length of base extension is roughly 1/4."

These seals from windows Im guessing 30 plus years old. Solid wood double hung cannot find any manufacturing info. Looking for 50' of bubble and and 25 of the other seals that goes in groove at window bottom to create seal with sill.

Hi, I have a need to determine if this Q-Lon type weatherstrip is available to me in segmented strips. I am going to need to determine a number of them to replace in custom double hung windows.The width of the usable profile is about 3/8" with the plastic fin jutting out at that angle. The material ... (cont.)

There are two different kerf strips in ea double hung assembly. One is foam filled for the lower sash where it meets the sill. The other appears (in 2 places) on top of the top rail where it meets the head jamb and secondly on the bottom rail of the upper sash where it meets the meeting rail of the ... (cont.)

My Jeld Wen windows are about 15 years old and the weatherstripping is seriously deteriorating. Jeld Wen says they no longer carry the material and suggests checking with third party vendors but so far no luck finding anything. The attached photo hopefully give you enough information to help. ... (cont.)

I am looking for this particular handle for a patio door. I was wondering if you could by chance help me. A little description on picture of the interior of the handle from screw to screw is 3-3/16 and the length of the handle is 8 1/2 inches. On the third picture of the exterior with the keyhole th ... (cont.)

1/4kerf x 1/4 bulb

Can you confirm the correct replacement weather seal for me? Thank you! Cindy

For an :Alpine window , series: 680 Part # BH 162701

This window seal is on casement windows that have no manufacturer identification. The crank and hinge manufacturer is Truth. The insert portion of the seal is square and fairly ridged. It measures 1/4-5/16 on the flat side which goes in the groove on the frame.

Size - 5/8" width Flange portion approx 5/16" Foam filled portion approx 5/16 Color White I am repairing some windows and require approximately 48'. Please assist me in identifying the material and if you carry it, please advise how we may order it from you. thank you.

Needs to replace exterior door weatherstripping. Originally ordered FOAM FILLED WEATHERSEAL,12FT, Product Code: 58-170B, but didn't have enough foam. Thanks.

Hi, I am looking for a match or good substitute for the weather stripping on my caradco patio doors. The doors measure: 1 3/4 inch by 34 1/2 inch by 93 inch. Above I attached multiple images of the stripling and doors. Let me know if I can provide you with anything else.

I found weather stripping that is white but I'm looking for bronze or brown Do you have anything that color that would work for this kind of weather stripping I need ? Mahalo

Flat side fits in a groove in the side of the window each side measures approx. 3/8"Slight ridge where it slips into a GAO in the side of the casement window

Hi, I'm looking for a suitable replacement for these seals that run horizontally between the sashes on an older model Viking window. The gap is quite substantial and the existing foam is pretty degraded. The right end in the second picture slots into a groove that appears to be a sort of T slot. Wou ... (cont.)

I have a Simonton Casement Window, dimension 1 series 1996. 36x34, that needs the weather strips replaced. There is a right and left crank out window. The round foam measures 7/16" and the flat measures 1/4". What weather strip do I need?