Viewing all customer Discussions for:

39-253RB Encore Dual Arm Operator, Sill Mount

One arm is stamped TruthBase is 4-15/16" wide, short arm is 4-7/8" long, long arm is 10"

Hello, looking for help identifying some window crank replacements that I have that either don't work well, or work but crack/pop as the window is being opened closed. I have several broken, but wanted to start with trying to fix one from each side before I commit to buying a ton of parts for all.If ... (cont.)

I am on your web site but couldn't identify my part to buy it . Could you help mr Thank you

Hi am trying to find replacement parts for Simonton casement windows. One size window is numbered 8482928/16. I need top and bottom arms and the opening mechanism

Think it is a casement sill mount split arm operator, need a replacement. It doesn't close and need to push it from outside while someone cranks the arm. Can find only 2 stamp #s on it, attached are pics. Please let me know what else you might need.I found an old invoice for replacment screens and ... (cont.)

The gear on the operator is partially stripped. Can you identify the part needed from these photos?

need to buy this part

Hello Swisco,Please help me identify the correct replacement window operators.The arms of the operator are stamped with the name "Truth"The bottom of one of the operators is stamped with the number 040398.In total I have two right handed operators and two left handed operators.I believe my existing ... (cont.)

Gears pop up and down slipping out of contatct with each other under the tension of use. Looks like they were forced open or closed as part of the mechanism is bent. Both right and left need replaced. Do you know the part #? 39-438B?on arm C-C40-31x55, 40986

Not sure if the whole thing needs replacing but the window wont close anymore

Hurd window crank teeth are worn out and window doesn't close anymore

Hopefully you can identify the Truth casement window cranks that we have. Both the right and left handles have broken. There may be more problems, but to avoid taking out all the wood to replace the gear mechanism, I thought I would start with replacing the handles--if available. If I need to buy ... (cont.)

I need to replace two cranks, one left opening, one right. Do you all have e these parts? The only text I have to go on for this one is that the arms read: 31876 and 41011, and the main body just has a date/time (10/05/01 05:15) and "Made in the U.S.A." Printed on the underside. Thanks for looking i ... (cont.)

Is it possible to only install new handles for this Truth 31858 window? I need two handles for the same window (right & left sides).

Lefthand: insert 4 7/8" short arm 4 7/8" 31876 long arm 10 1/4" 41011 connector 31858 Righthand insert 4 7/8" short arm 4 7/8" 31876 long arm 10 1/4" 41012 connector 31858 The sliders look to be the smaller (253) ones.

Hello, I have a casement window which has Truth 30744A labelled on one of the arms. Looking through your inventory, it looks closest to the Encore Dual Arm Operator, Sill Mount (39-253RB). When turning the crank to close the window, the dark gear rises (shown by red arrow) and loses contact with th ... (cont.)

I need to know what the replacement part is for these windows Milgard Studio (east face) Series 5320/5331/5720, PL #032-143 The longest arm Measures 10.5"

Good afternoon, I would like to replace some of my worn out Hurd Window crank mechanisms. Could you advise what I should order to replace them. Also, will I be able to use the existing handle and cover with the new mechanism? Thank you!

The long arm is 9 inches, the short straight arm is 4-1/2 inches. I see numbers: 31538a on the curved arm, 45179 on the crank assembly, 40754 on the short arm, a 5 digit number on the long arm which I cant quite make out, first digit is either a 3 or an 8, last digits are 1272. I need a left ha ... (cont.)

Can you help me get a replacement pair.The long arm is 10 inches Thank you Jim P