Viewing all customer Discussions for:

39-253RB Encore Dual Arm Operator, Sill Mount

Hopefully you can identify the Truth casement window cranks that we have. Both the right and left handles have broken. There may be more problems, but to avoid taking out all the wood to replace the gear mechanism, I thought I would start with replacing the handles--if available. If I need to buy ... (cont.)

I need to replace two cranks, one left opening, one right. Do you all have e these parts? The only text I have to go on for this one is that the arms read: 31876 and 41011, and the main body just has a date/time (10/05/01 05:15) and "Made in the U.S.A." Printed on the underside. Thanks for looking i ... (cont.)

Is it possible to only install new handles for this Truth 31858 window? I need two handles for the same window (right & left sides).

Lefthand: insert 4 7/8" short arm 4 7/8" 31876 long arm 10 1/4" 41011 connector 31858 Righthand insert 4 7/8" short arm 4 7/8" 31876 long arm 10 1/4" 41012 connector 31858 The sliders look to be the smaller (253) ones.

Hello, I have a casement window which has Truth 30744A labelled on one of the arms. Looking through your inventory, it looks closest to the Encore Dual Arm Operator, Sill Mount (39-253RB). When turning the crank to close the window, the dark gear rises (shown by red arrow) and loses contact with th ... (cont.)

I need to know what the replacement part is for these windows Milgard Studio (east face) Series 5320/5331/5720, PL #032-143 The longest arm Measures 10.5"

Good afternoon, I would like to replace some of my worn out Hurd Window crank mechanisms. Could you advise what I should order to replace them. Also, will I be able to use the existing handle and cover with the new mechanism? Thank you!

The long arm is 9 inches, the short straight arm is 4-1/2 inches. I see numbers: 31538a on the curved arm, 45179 on the crank assembly, 40754 on the short arm, a 5 digit number on the long arm which I cant quite make out, first digit is either a 3 or an 8, last digits are 1272. I need a left ha ... (cont.)

Can you help me get a replacement pair.The long arm is 10 inches Thank you Jim P

good afternoon,I am looking for a few operators for replacements. our window are Milgard, Studio Series 5320/5331/5720, PL #032-143. the operators are not closing all the way. I have submitted 5 photos for reference.thanks,Meagan

Hi, I need this Truth window operator sourced. As well as the cover and handles. Operators for left hand and right hand. Thank you,

This a casement crank out window that the crank has stopped working I need to replace it

Need the left hand operator color- Beige numbers on operator 31876 on one arm 41012 on other arm

Hi there. I've been looking for replacement cranks for both left and right windows. The ones in store don't seem to line up well. Any help is greatly appreciated!

Good evening, some of the windows in my house do not open properly. They get stuck on the frame and some won't Close without me, pulling the window in. I don't know if it's the mechanism or what. But it looks like a product that you sell.

Our old model windows can't be closes tightly by the operator working. I need to replace this operator, but I couldn't find it at hardware stores. Do you have it in your store?

Long arm-10.5", Short arm-4:5"+middle arm-4.5", bracket 2" wide

The handle snapped off the drive shaft for opening mechanism on the right side window. The parts photographed are of the left side. So I will need the opposite of the left side drive mechanism.

Hello! The gears on my window operator are stripped out and need to be replaced. Can you help me ID which window operator I have? Also, is it possible to only replace just the window operator and reuse the existing covers?

Another company told me my version is discontinued Do you have anything like this? Thank you.