Viewing all customer Discussions for:

39-438B Encore Dual Arm Operator, Sill Mount, Low Profile

Need replacement operator.

Looking for two Truth window crank mechanisms. Also can you show me how they attach to the window?

Hi,The casement window crank doesn't open very well. The gear is worn down so the teeth don't grip. The window is a Simonton. I've got two of these windows that have this issue and the other one is just the reverse opening direction.Thanks,Eric

Hello, thanks for running a great web site! I hope you can help me: I have large Mira Premium casement windows (about 70x24 in. Many of the operators are rusty or their adjustment screws inoperable. Many keepers are broken because of excessive force applied. I was able to identify the keepers as Tru ... (cont.)

I'm looking to replace four broken window cranks but don't seem to find the exact match. I've included a picture.

Are you able to help me find this armature? I need a new crank and arm piece.

I am looking for a match for this Truth dual arm operator. Please see the picture with the measurements. Thank you!

Operator works, but I have no connection to the slide bar on the sash itself from the inside it's pivoted on the left so it should be a left hand operator also need the locking mechanism on the inside I gave the size between the screw holes the handle is the only thing that doesn't work on that and ... (cont.)

Can I use the 39-253RB as a replacement for the casement arm as shown in the pictures? Do I need extra parts?

Something is striped on each window I can manually open each window about 3 inches then the crank will work out and in but it won't crank it to close the final 3 inches.it looks I need a dual arm right and left.I hope your able to help

The arm attached to the bottom of the window has rusted to the point it crumbles. No identifiers on window or crank arm assembly. The window was put in approx 20 years go.

I need a whole new two point locking system with a 15" bar. Also the plastic clips that hold the bar in place. I also need 2 lh operators and 1 rh operator.

Hi: Can you identify the item in the attached photos and let me know if you have it available or where I can get it. Thank you, Al

I have a window that needs to have a new crank window opening. It appears that the gears are striped and just clicks as you get closer toFully closing the window. In the winter it is really hard to manipulate it to a close position. Can you help me with the replacement parts?P S. Our home was a new ... (cont.)

Looking for this operator

Marked "Truth", but cannot find a part number. The arm falls off the track attached to underside of window when we crank it out( the longest arm of the unit). The arm is about 10 1/2" long. I maybe could find a part number if I knew where to look on the part. Thank you.

Looking to replace these as the gears are worn.

Can you replace this? Mary Ann

hi i'm looking for this part of the window, i need like this part that has the bigger fitting hole, the one in the package doesn't work. if u have please let me know. I need 4 left and 4 right. I need both parts, folding handle crank with cover. 4 pices of left and 4 pices of right ... (cont.)

Hi, I need to replace my window operator due to a stripped gear. I don't find any notch in the slider track to pull the operator arm from the track. How do you remove it? Thank you!