Viewing all customer Discussions for:

39-438B Encore Dual Arm Operator, Sill Mount, Low Profile

Hi. I have a Jeldwen casement window that is broken where the handle attaches to the crank. I'm not sure which part to order.

To Whom it May Concern:The number 41011 is stamped on the underside of the long arm. There are six mounting screws, equally divided on the crankset mounting flange.Best wishes,Thomas

Jenweld casement

two windows don't work. trying to find if you would have these parts. I took pictures of window with cranks working.

I have a few of these window cranks in our house that no longer work. The handles say Thomas Clad and the bracket says Truth 31858. I believe that the gears are stripped out.Here is another window crank that has the cover removed and the one says Thomas Bilt.

I need one of this assembly

Hi our window will not turn in so I would like to get the replacement parts to fix it

Need new crank hardware. Inside cover it says truth hardware s. No indication of window manufacturer.

The crank is not smooth. It jams up and there is a lot of play. Window from 2004. Insure of manufacturer. Looking for both left and rightOne arm has a stamp of 31858 and 31876

No marking on window frame or cranks. The crank works to open window but clicks and won't "catch" to fully close.

Hello, I have Truth windows made in 2001 and need to replace several operators. I am trying to identify which operator I have. Thank you.

Will not fully close window. Stops at point shown

I need to replace this crank. The measurements line up with your description on your page. I also need to replace the black piece that latches to the window. As you can see in the picture, it is bent. I also need the cover and gasket like in the picture.

It looks like this window has two different operating cranks. The first one is left side and second photo is the right side. The name on them is Truth and on the second picture I see the numbers 30818.

Hi, please help me identify the parts for this casement window. I would like to replace all the hinges and supporting brackets and the cracking mechanism as well.

Works fine once it is clear of the jamb but just spins when closing tight or opening from closed.

Hello again, See attached photos of our latest failed operator. The unit is stamped with "Truth" and the number 41012. This is on a thru the sill mounting. I'd would like the white cover and a new gasket if that doesn't come with the crank assembly. Thanks you.

Hello. I need to get some replacement parts for a window. Pretty much need all the hardware shown as it has been super corroded. Please guide me to parts I would need. The crank is right sided. I believe its Encore need crank, cover, rails and slides. I have a few other photos if you need them as id ... (cont.)

I'm looking for new hardwares for my PGT windows - operators and everything. I have approximately 35 casement windows total, combination of left hand and right hand. I would really like to get STAINLESS STEEL HARDWARES since I live near the beach and the existing hardwares have corroded to the poi ... (cont.)

Hard to extract