Viewing all customer Discussions for:

32-057 13-3/4" Self-Closing Drawer Slide Pair

Looking to replace this part in an old kitchen cabinet drawer.

I have old shrock kitchen drawers and the plastic back plate cracked. The track has a width of 1 inch and the it seems that the plastic back plate is 1 1/16 inches wide.I called Shrock and they no longer have any parts.The glide is 21 1/2 inches long and the back plate is 3 3/4 inches and the tra ... (cont.)

Hi, I am looking for the other side to the roller shown. THat is I need a Drawer Left assembly (DL). The one shown is Drawer Right.

We need 4 of these plastic parts/tracks) which the drawers slide onto. Need to know where to order, or look, for these. Thanks

I have new drawers I have to replace in a home. The original drawers were tossed. They were installed with unigrass6600 sliders. The original installation is in tact inside the cabinets. What I am missing are the parts that have to be on the sides of the drawers. Where can I find these sliders so ... (cont.)

I need a few replacement slide rails.

Grant DR drawer roller guide 1:2"

The bracket broke on another drawer. Slips into an "L" shaped opening on the side rail. Hardware from 2001.

I can not find any quite like these. The roller wheel is on the outside of the bracket. This roller in the picture goes on the right rear of the drawer. All I see are backwards or have the wheel on the inside of the bracket. I do not see a way to modify and use those. I have dozens of these and ... (cont.)

Plastic mounts that hold track to the side of pantry Slide out trays

How do I remove the rail from back bracket. if I cant, can I remove the back bracket completely and get a full set to replace?

I need a 3 pairs of groove mount drawer sliders. They need to be 1" in Width and 12-14" in length

Hello ! We need one of these drawer parts. It came with our Project source cabinet we purchased from Lowe's.

I need 6 - 13 11/16 corner replacement glides, with screws and accessories, if necessary (three draws)Can you please help me out?I think I need this13-5/8" SELF-CLOSING DRAWER SLIDE PAIRProduct Code: 32-057James

This parts hold the track on the back of the cabinet. We do not see any manufacturer name or part number.

Drawer roller

Corner mounted bracket for kitchen drawer, wheel has broken off, will need both corners. Top of bracket to center of wheel is about 2.5". Happy new year!

I have looked at your dimensions on 32-018 which handles a slide 7/8 inch tall and 32-089 handles 1 inch slide. I need 1 1/8 inch for my slide to clear. Is there a brace that will handle that?

Kent Moore Cabinets. The part does not use screws. It attaches to two holes at the back of the cabinet. One drawer fall. The others have not but most are damaged. I would like to get parts for 6 drawers.

I need to purchase a set of these