Viewing all customer Discussions for:

82-089 Legacy Handle Set, 3-15/16" (1-1/8" to 2-1/2")

Before I purchase on your site, is 82-265 the correct replacement lock for this, top to bottom are 11" on the screws? I think the internal lock is broke. If I were to buy a replacement handle as well, what handle w/lock will be compatible as well? The latch seems loose and I took off and do not s ... (cont.)

Hi, Looking for a replacement handle for my sliding door. The length is 9.5.

Parks 82-089 and 82-090 are both listed as 8 1/2 inch. I needed a 10 inch handle. Did you have another part recommendation?

Need to replace a broken exterior white handle and the interior locking bright brass handle on a sliding glass door

Off of Windoor units. No locks/keys. Black. Need 9 total.

Which is the replacement part?

Looking got replacement handle can you recommend the right model.

Need the whole kit

Both of these handles have latches on the interior of the right and left middle doors. The latch on the left door handle has broken. Can you help me find a replacement set? Thank you.

Please help

I ordered a multi-point mortise lock replacement for my patio door, and I can confirm that it is the exact same lock as my former one (both have Patent #'s 5.264.252 and 5.820.170 engraved on them. The old lock was manufactured in Sep 2008, and the new one was manufactured in Jul 2021 (A1). I have ... (cont.)

Hi Swisco Expert, Please identify the mortised lock assembly for my patio door so I can replace. Many Thanks, Roy Kemp

There was no identifiable information of the brand for this lock. It looks like a Swissco but it does not say. The lever for the lock had broken off. Any information would be appreciated.

I need a replacement door handle for my sliding door. The top metal bolt holder broke off the handle. Color is ivory, and distance between bolts is 4 inches, and distance from bottom bolt to the locking pin is 1.5 inches.

Hi, I'm looking for the lock set for my patio sliding door with two latch lever. Its color is Not white. Please let me know if you have it in stock. Thanks Freddy

Looking for my back sliding door handle

We would like to add keyed lock what do we need to buy? Can we just add lock or do we need to buy complete handle. Thank You Otmer Evans

The handle on the right is clearly not a correct replacement, but I believe I need to replace both sides handles and the mortise lock. I am not sure of the part numbers needed to make this start working again.

It states amesbury hardware on the back and the inside handle has "B" labeled on the inside and the outside has an "A" on it.. It's also a keyless lock and the top to bottom screw holes are 4' apart with the lock hole an 1 1/4 from the bottom hole..

I am looking for help identifying the handle/lock for our sliding glass door. I have attached 3 photos. Thank you.