Viewing all customer Discussions for:

40-097 Complete Mortise Lockset, Papaiz

Hello....tried from Home Depot to get a replacement lock set for a Grisham Storm Door ..8 and 3/8 bolt spacing on latch face plate....7 and 1/4 inch spacing on the two screws holding the inside handle plate to the outside handle plate...please see what fits and I'll order it ASAP ... (cont.)

Would either 40-049 or 40-097 be a replacement for the existing. See pics below.L.

I have the 32 inch Larson classic view security door # 36950 purchased in 1995 I need to replace the ENTIRE door latch/lock handle assembly. What is the item number I would need to order

Hello,I am hoping you can provide a Storm Door Mortise Latch. I have attached 5 photographs with various measurements. I believe I might have found something on your website which will work but what I found was a Complete Mortise Lockset and I am hoping to just purchase the mechanism which failed an ... (cont.)

Hello Swisco Team, I need some help with a replacement lock set for my sreen/security door. I am attaching 3 pictures; unfortunately I was not able to mark them up with the measurement, so here they are: Opening in the screen door for the body of the lock to fit in: 8 1/8th inches by 3/4 inch Bod ... (cont.)

I recently replaced all of the door hardware in my house and changed color to black. Would like to do the same for a Larson Storm Door that currently has a brass lockset. See attached photos. Tried using Larson's QuickFit handle product, but they changed the spindle from four-sided to five-sided so ... (cont.)

I need to replace this whole thing. I replaced the handles a while back b/c they would come loose. They're doing that again as well as the 'catch' piece that goes in and out (I don't know the technical term) to keep the door closed gets stuck in the hole lately. Also the deadbolt has begun to have p ... (cont.)

I'm looking to replace my handle and lock

Need Sandstone color retainer strips and Replacement Emtek 322 handle for what I think may be a Chambers brand door. Was installed around 1993, not certain. What color would the handles be available in? retainer strips as follows. 2 at 32" and 2 at 74"also need two rubber sweeps. They have a narro ... (cont.)

Greetings,I've seen a thread showing an option for this, but its several years old and my specs are a little different.7 3/4" high narrow trim set3/4 or 7/8" backset3" center of deadbolt lock to center of lever handle1 1/4" metal storm doorNeed matching strike platesNeed qnty 3Need Bronze, Black or ... (cont.)

Is this a KW-1 keyway?

We are in need of a replacement striker plate for the handle and lock. It is a Weight brand in a larso n storm door.

Looking for a replacement for this PADO LATAO lock. Front Brass plate: is 7 1/8 inches long, mounting screws are 6 3/4 inches apart on centers and the plate is 1 inch wide. Edge Brass plate: is 7 1/2 inches long and 7/8 inch wide. Latches are 2 inches apart. Upper latch is handle activated, lo ... (cont.)