Viewing all customer Discussions for:

38-079 Casement Sash Lock Keeper

I purchased 2 parts from Swisco several years ago. Part # 38-013 and 38-014. Right and left window locks. I neglected to purchase the part that secures into these. The other half of the lock system. These parts are no longer on your website. Do you have the coordinating piece that would fit the ... (cont.)

I am enclosing pictures of 3" x 2" casement locker. Would you be so kind and tell me whether you have it in stock?

The homeowner wants to paint the windows brown. Do you have locks, handles and covers in bronze? See attached photo. Thanks.

There are two windows I need replacement part on the first two pictures are of the lock that is on the window the others are of a handle that broke

need 4 latch plates for Weathervane wood casement window

Any idea if you have these parts

Operator arm is 10 1/4" long. What replacement operator parts will work in place of this old broken one?

Hello, I am hoping you can help me with replacement parts for windows in a new/old home we purchased. The windows are Caradco and we need to find these parts - the first is the window keeper/sash keeper. It measures 2"h x 1/2"w x approx. 1" deep. The second is the latch the grabs on to this pi ... (cont.)

I'm sorry I don't have much more to go on. There are no labels on the windows and no etching on the glass. The windows could be approx. 30 years old the House was built approx. early 70's.There is one number after looking more and that's on the arm of the window and it is 30146. I have researched th ... (cont.)

I need two Century window latch keepers for Century Casement windows installed in 1994. Thanks for any advice. Jerry

Looking to replace both LH and RH latches with broken handles. Unknown window manufacturer, home was built in 1962. First three pics are original (4 mounting screws). Last pic shows replacement latches (2 mounting screws) purchased a while back. Base dimensions are 3" x 2-9/16" x 1". ... (cont.)

I need 8 of these - they are from MW casement windows. There is a part number on the piece: 30827A. Length of piece: 1 3/4" depth: 7/8" do you have any in stock, or know where I can get some? thanks

The arm that extends the window out when turning the arm crank has become disconnected from the bottom of the window so I am guessing we need to buy a replacement kit. Also, one of the window latches is missing on one of the windows, preventing us from securing it closed so we need that replacement ... (cont.)

Hi - Just discovered your company and am very happy that I may be able to replace parts of broken casement windows instead of getting new windows! I have 1980 Weather Shield Casement windows. Am stumped on how to remove the crank handles. I do not see any set screw visible. Does the handle just ... (cont.)

I need two oil rubbed bronze latches for a double casement window. The photos attached show the correct latch but the finish is obviously rubbed off. Tony

I'm looking for a replacement lever for the lock in the pictures. Thank you Sandy

I have Caradco windows and I am in the need of a casement sash lock and a casement operator, both are right side. Enclosed you will find the pictures of the parts. Please let me know if you have the requested parts as well as the prices. Thank you very much for your help. Jose

Hi, I had my house painted recently and the painters removed the window hardware to trim them. I noticed that they did not replace the lock keepers on 2 casement windows. So the windows do not now fully close which is a bit of a problem up here in northwest NJ in winter. My question is can I us ... (cont.)

Kolbe windows installed in 1995. Please help There are 52 windows. Not sure how they are called out properly but from the inside as I look at them I have 27 units with the crank/hinge on the left side and 25 units with the crank/hinge on the right. Listed below are the part numbers I believe a ... (cont.)

i have the 38-097 sash lock and the 38-079 keeper and i can't figure out how to make them work. it seems to me that the keeper need to be much deeper than 7/8" thanks