Viewing all customer Discussions for:

39-001 Window Crank Operator, 9"

Casement Window Crank & Bottom Track Identification Request. Would appreciation any assistance that you could provide.

We are doing a large restoration job in VA and will need to replace several, several awning cranks. The attached pics are an example of a typical crank that will be replaced. Please contact me with any questions or if you need more info.

Attached is a photo of my operator. Does your replacement unit have the center "pivot" pin shown on the crank body? Is an additional "T" handle available for this and what is the price on that? Is the material aluminum or painted metal of some kind?

No markings available, unfortunately. Do you need additional images? Thanks so much for this service!

I'm thinking I could use some of the cheaper, 9" options that match my existing mounting hole patterns (though my arms are 9-1/2")

Hello, Can you tell me what I need to order to replace a window crank? I am attaching a photo of the current crank which does not operate. Thanks,

Hi There, Are the 39-001&2 interchangeable with the 39-138&139 aside from the extra 1/2 inch on the arm? Are the 39-138&139 the heaviest duty versions you have for this type? Do the 39-138&139's come with handles? If not which ones would I order? Thanks, Rick

Dear Swisco, We have a school with casement windows. I'm looking for a stronger operator. It looks like the 39-001/002 and the 39-044/045 would both fit my windows. Which one is stronger inside? I'm looking for something that can stand up to a 12-year old.

What is the minimum height of the frame necessary to re-install a crank operator. The granite piece that is the sill was added later and we don't know how much it covers of the bottom of the frame. The frame showing above the granite is about 7/8 of an inch. Each window opening is 16 1/4 wide and ... (cont.)

I am redoing some steel casement windows, i need new operators (Left and Right handed) and latches. Attached are some photos. I was wondering if you could identify and if you had the same in stock. You Neutral Locking Handle, 2-3/8" Product Code: 38-001, looks like a match to me. What do you thi ... (cont.)

Hi Mate, Can you confirm that the Casement operator 39-001 comes with a handle as shown on the picture advertised? Or are the winding handles sold separately? Your advice would be appreciated. Thanks, Barry

I have Ware windows on a mid 1960s home that I just purchased. I have included a picture and hoping you can help identify the part required to replace. Image A shows a crank in a window that is complete. Image B shows the only window marking that I can find showing it is a Ware window. Image D s ... (cont.)

No name, numbers or stamp to identify manufacturer of this window crank for a casement aluminum bathroom window unless it was painted over by previous owner.

Hi Swisco - I am hoping you can help me find a replacement crank for a crank-out window from the 60's. (A burglar broke it while trying to get into my mother's home.) It's "box" is 1.5" deep by 3.125" wide, not including the outside ears where the screw holes were. They were broken off by the burgl ... (cont.)

Hi I need to replace the window crank operator for an old steel window. The problem that I am having with the parts found in the hardware store is that at the end of the arm where the circle slides through the slide in the part of the window that opens- on the opposite side of the arm - wher ... (cont.)

The interior gear seems to be stripped. Fentron is stamped on the handle. That's all the info I have. Would like to purchase a replacement, possibly more as I work through the house. Windows are circa 1962

Hello, I have several old casement windows that have the gears stripped on the arms. The operators and the worm gears are all fine, but the arm gears are stripped. By my measurements, your 39-001 and 39-002 would make full replacements possible, but I was wondering if it is possible to just get ... (cont.)

G'day, Have you a short handle that will fit the 39-001/2 window winder to accomodate venetian blinds?, thanks frank

Please help! We just moved into a rental property and realized all of the casement windows are missing hardware and/or cranks. We are hoping you have the parts to make them functional. The house is located in Southern California and was built in 1950. Thanks!

Please see the attached pictures and measurements. I may need 15-30 of these.