Viewing all customer Discussions for:

39-001 Window Crank Operator, 9"

Hello, I'm looking for replacement crank operators and latches for a bunch of 1960s metal-frame single-pane windows. I'm attaching photos showing every measurement I could get my hands on, since I cannot find any brand or identifying information on the parts :) I have tried the "universal repla ... (cont.)

I do not see any identifying marks on the part.

If you can call me at 724-970-6517

Hi. What type of locking handle should be used for a glass casement window, which, I believe, uses a #39-001 9-inch window crank operator, which I want to buy from your company? What's the difference between handle 38-005 & 38-001? Do you ship to NY &/or PRico? Thanks

I live in Florida. The house is CMU built in the late 1940s. A lot of the windows are painted shut but Im trying to make them operable one by one. I think this will match 39-001, but I'd like to be sure. Will the part need additional finishing to account for the moisture down here? Thanks for your h ... (cont.)

If the measurements of your Getty operator match up to the measurements found in the 39-020 operator product picture, it should work for you. In the event that it does not work, we do accept returns. Visit SWISCO's return policy to see our most current return policy. *Note: This may change in the ... (cont.)

Need r and l for this. 3 7/8" inner holes 4 3/4 outer. 9" arm. Handle stamped Fentron Stella casement frame

I am looking to purchase a total of 39-001 and 39-002 winders. What is the correct track to use. Peter

Do the 39-001 & 39-002 crank assemblies come in bronze?

Hi- I have a house full of metal casement windows which require new operators. The ones I find locally are typical inexpensive Home Depot operators that often don't work at all or have protruding fasteners on the tips that prohibit operation of the window since they protrusion blocks the window fro ... (cont.)

My house was built in 1947. My right hand window crank is bad (stripped gear). The arm is 9 inches long. Will the 39-344 fit? Where is the part no. of my window crank located? Thank You

I do not know the brand of my metal casement Windows. I need to replace the hardware on several Windows. Attached are two photos. Can you help me? Thank you. Rich

description does not mention if installation screws are included. Are they or do you have an additional part number for purchase?

Recently ordered the 39-001/2 casement window crank assembly. Upon installation of the crank handle we discovered that it would not freely turn in a full circle because the set-screw tang on the crank handle is striking the beveled top edge of the crank-gear housing. It appears that either the e ... (cont.)

I'm including 2 pictures of the window latch, notice one handle is broken, please let me know if have this available and price. Thank You

On the deminsions shown on this window crank one seems to be missing. I am replacing a crank operator in a house built in 1953. I picked up a unit at home depot and it would not work. The problem the button at the end of the arm was to thick to exit the window frane and ingage the window. Your digra ... (cont.)

Hello, Please see attached pictures and let me know if I can get the parts form you. Thank you Nina

Hi I need a window crank operator with a 1/2 inch wide button that is 1/16 thick. The distance from the top of the button to the bottom of the operator is 5/16. The distance between the screw holes is 3 7/8. The distance from the bottom of the operator to the middle of the screw hole is 3/8. The ... (cont.)

Which T-handle will fit the 39-002 and 39-001 operators?

Have read some of your other replies and greatly appreciate your knowledge and consideration of the questioner. This 39-045 operator is the closest thing I see listed to the stripped out operator I removed from what I believe to be a "RADCO" aluminum casement window new in 1978. Screw hole alignmen ... (cont.)