Viewing all customer Discussions for:

39-011 LH Superior Window Crank

Take a look at our 39-011 and 39-012 operators, compare the dimensions of our parts to that of yours, and see if these will work for you.

Pat.No 198202 US this is the only number on it. In case you cna't read the numbers written on the paper in the pictures the height is 5 1/4 distance between screws on bottom: 1 1/8 ctr to ctr arm bar is flat and ctr to ctr is 2 1/2

The crank on my window is stripped and I can't get it closed all the way. I live in PA and this is for a condo in Florida. Stupidly, I did not measure the device or bring it back with me, so I can only guess about the measurements. I'm going down there in a week and would like to take something wit ... (cont.)

We have a contract for the temporary rehab of over 20,000 units under the FEMA sponsored step program. At present we have need of a large amount of window operators. If you are interested in supplying same please contact me as soon as possible.

Looking at your product number 30-011. I need the arms to be 3 inches and the internal arm to be appx 3 1/2 inch Does this meet these requirements. Thanks Sue

Can you please identify the specific crank assembly and window lock needed for this window ?

Hi, Do you have the replacement for this or know where I may find a replacement? I don't see anything written on it. Thank you, Bridget

the 39-378 is a right hand operator that matches the old operators I want to replace, hole centers shape ... I can not find matching left hand Can you help? I need two. The two holes on the bottom and the single hole on top are exact match to my piece.The center of the existing holes are 5&1/4 ... (cont.)

I can't find any name/number/marks on this assembly to identify it, I'm hoping you can help me replace this because the retainer threads have been stripped out. Measurements: 5-1/4" top to bottom (all measurements approx. hole center to hole center) 1-1/8" between the bottom two screw holes 2" ... (cont.)

Hello, I have to replace several dozen cranks, and am unsure which is the correct Pan Am crank. I've included several photos, if that is of use

I have a sunroom crank window with the ext dimenions of the Superior Window Crank. The one problem is the fastening of the 3/8" arm end. The existing hardware is a philips head screw on one side and what looks like your special nut (33-205). I'll have to drill those out to replace. Do you have ... (cont.)