Viewing all customer Discussions for:

39-026 Awning Window Crank Operator

Hello, I'm trying to find 7 replacement cranks for my windows. I just bought the house and it was built in 1953. The porch was enclosed after it was built. The cranks don't pull the windows shut anymore. Any idea as to what parts I need to buy? I was able to rig them to stay shut for now. Thanks s ... (cont.)

Need to replace this with screws . It originally had a rivet that my husband had to pop out to take it off.

Hello! I have ten of these windows that are showing their age. I've looked everywhere for any type of markings and I can't find any. I saw a video where a guy replaced similar windows on his Airstream and said the model number is usually on the lower left exterior, but mine has nothing. I need ... (cont.)

Hi, I am looking to replace a couple awning window cranks (bronze) and need a couple metal plates and plastic parts for inside the mechanism. I have pics attached and looking for help in matching up Thank you Rhonda

Hello, My name is Chuck G and I ordered this part # 39-008 last February. The operator had a crank on the right hand side which was fine for that window. Now I need the same operator but with the crank on the left hand side. I don't know how to order this on your website and have already s ... (cont.)

Hello, trying to replace old window cranks for the church. Unsure of what type to replace with 39-252 or the 39-205. Both a look except for the measurements. I would like to send you a photo of the type we have. I would like to order 40 each for the church. I have a tax exempt number for the orderin ... (cont.)

Hello: This is one of the old operators I want to replace with the ones I recently purchased. I think the part # is the same as ones I purchased earlier but I see the new ones are different. I drilled the threads out on one window to try and make one new operator work. But d

I am looking for one awning window replacement crank as shown. the crank operates on the left inside corner. Also looking for approximately 234 linear feet of White snap in awning window glazing bead. the measurements are 7/8 in x 3/8 in I can be available to discuss this with someone so that I ma ... (cont.)

Hi, Do you have the replacement for this or know where I may find a replacement? I don't see anything written on it. Thank you, Bridget

I'm looking for the replacement for the PAT. NO. D-198, 202 U.8 RD. 1963 CAN . I need 7 Right and 2 Left. Thank you

I am in need of two (2) Awning Window crank operators left hand only. Attached is a picture of the item I need. Can you help me with finding one? Thank you. Mike

Hello! I have several awning windows that are maybe 12 years old but unknown who the manufacturer is and the installer is long gone. I

My operator is very close in dimension to 39-026 except the bottom mounting holes are 1 1/8" center to center, and the arm length is 2 1/8". Slight differences both. The length is exact. How would the arm length difference affect operation? Is there a better fit with another model? I can't fin ... (cont.)

r/h awning window operator 5-1/4" between holes. 1 hole at top 2 at bottom 1-1/4" between them 2-1/2" between connector rivet and bushing on arm. prefer white operator, but will take other color. do not know brand of window. approximately 20 years old. please let me know asap if you have a matching ... (cont.)

Hello! I have about 8 awning windows that were installed new about 10 years ago so not too old. The location is on the Jersey shore so sand is always an issue with the gears which I'll be cleaning and lubing (silicon spray) on a regular basis going forward based on your site's recommendations. ... (cont.)

Need to know model number or brand to order part need 4

HI, I need help finding these cranks. No names, ID #s or anything anywhere. They are white aluminum,4 panel -about 36" by 62" (? framed in so can't be sure). The cranks are on the right.From the bottom 2 mounting holes to the third top hole it is 5 and 1/4". The bottoms mounting holes are about 1 ... (cont.)

window crank #39-205

My mistake! My E-mail address is wrong. Can you please correct and re-send? Thank you!! --mike

Is the 33-206 the right size, or the 33-207? Thanks!