Viewing all customer Discussions for:

39-031 EntryGard Dual Arm Operator

I need 5 replacements, can you help me?one with trim and handle. To be clear, the bad cranks are all on the lower right side of the window as you look at it from the inside.

I need a right hand and left hand of this item. I also own a glass and glazing company so if I I need to buy this commercially I can.

This was stamped on the arm operator. Truth 20810. Could you please advise if the 39-107FK TRUTH FOLDING HANDLE AND COVER KIT work?

Need part for the window with following identifiers: SNE IGCC CPA

I need the same left window hardware. 45179, the short arm says L 31538AI'm going to need 4 replacement cranks.I need the entire hardware, not just the cranks

casement window hardware. Crank in middle of mechanism. 2 equal-sized gears left of crank

Hello Swisco,I am in need of left and right crank mechanisms for my L and R casement Windows. Your 39-253LB and RB may be what I need, but value your opinion. The old mechanisms have the words TRUTH and Entry Gard on the long arm.Regards, Jim

Trying to locate replacement hardware for casement windows.Parts had identifying numbers of30744R30842Please advise if parts are available for purchase.Thank youIra

Casement sash operators for two different size sash, however operator is same. Need 4 right mounted and 6 left mounted. Only noted variance on operators is number stamped on arm attached to gear; R30842 vs. 30842R?Also need 6 crank operator handles, color as illustrated in photo.Regards,Ken ... (cont.)

I am looking to purchase Truth entry gard 40753 /31538A L - we will also require the R hand identical hardware. Please let me know how to proceed

Seems like the gear is stripped. Will open but not close Randy

All the parts need to be replaced in The Dining room bay window. I am also sending another request after this for another window. Look forward to your reply!Dick

Replacing a crank operator i overtorqued and broke. Window opens on the left and swings out to the right. Existing one said Entry Gard Truth, us patent 4241541, also has 40471, 20810, and 3084IL stamped on various parts. The long arm is about 9 1/4".

Hi, hopefully you can help me out. I have been looking for the replacement of the window crank assembly,the arms are fine. I have been searching for this brand,Truth, replacement parts with no luck. Any information, advice or guidance is hugely appreciated!

Our KK window crank broke off and need to replace the star inside the handle. Do we need to replace the whole crank mechanism?

I hope my pic helps identify the operator. This is a condo development and I am the maintenance dept.If my pic helps determine R or L and correct replacement operator, I can then inventory how many of each I need and I can make an order immediately.ThanksDave

I need to replace two right-side operators, two left-side operators, and one left-side latch (opposite to shown in photo. One of the operators is identified as an "Entry Guard, Truth" with Part Nos. 30841L and 20810 visible. I also need to order one of your Pry Bar and Scraper Tool (#75-081).Thank ... (cont.)

I am missing the screw for the crank handle to turn for the mechanism. Can I purchase this part.

Looking for this window crank operator and handle. I believe it is an entygard by truth

I need to replace Truth window cranks for a few windows. The numbers that are on the main mechanism (plate) are 30471 and 40264. The gears are stripped and cannot open or close the window all the way. Can you help me get the correct parts? I need 3 left hand, 3 right hand, the covers and the matc ... (cont.)