Viewing all customer Discussions for:

39-031 EntryGard Dual Arm Operator

We need some replacement cranks for our KK windows. I think the numbers on the crank are 30810 and 6295P. It also has Entry Gard printed on it. I think we need about 5 cranks.

Hello Swisco,The Glass Guru of Carlsbad here. We need several of these for a customer, but we're going to start with one to try. EntryGuard by Truth, 4" straight arm, 9" long arm, 3 1/4" crooked arem, 5" bottom straight connector. Right side, including track on bottom of window.Can you find this, ... (cont.)

I need replacement part for left hand crank & handle for a crestline casment window!! Thank -You !! ! With entry guard

I sent a previous email w/ o pics. Sorry. I ordered 2 39-035 thinking that this would also fit the Picture Window. My goof. The window is 65" tall x 18" wide. I'm helping my parents, can I return the extra 39-035 and place the order for this Crank and get refunded when u receive the Crank back? ... (cont.)

Not sure if this is considered left or right opening. # on gear plate is 40471. # on short arm is 20810. Only info on long arm is name "Entry Guard Truth", no #'s. Overall length is 13". Long arm 9". Short arm 4" (from hinge to end, not total length from gear. What is cost of replacement part? Will ... (cont.)

Entry Guard 20810 operator for a right side window. Arm is 8"

It looks like I can replace the whole crank assembly so if u could get me a part # and price that'd be great. If you need measurements let me know.

I am working on cleaning up the window cranks. We have several that the long screw attached to the crank won't turn to "close" the window or is missing the crank and long screw attachment. It looks like it is "stripped". Can the two parts be bought?

Hello I have this biltbest window cranks that appears to be broken. We can open the window but when we attempt to close it, the stem comes out.If I have to replace the whole assembly, I need two of them. One for left window and the other for right. The cranks are located in the center of the wind ... (cont.)

We need to replace this bad latch. It is a left hand opener.

This piece of my window sill hardware has rusted and a piece (arm) has fallen off (and lost in the shrubs two floors down). I had originally ordered two other crank parts ( item #39-031 and #39-253L) thinking it was the crank system that had broken but after dismantling the crank system, I found it ... (cont.)

I am looking for a new opener for a casement style window, could be a Vetter? Thanks Dave

Hello, I am looking for replacement parts for two different operators. Operator #1 is part of a casement window which came with the house which was built in 1988. I don't see any markings on the window but it is possible I didn't look in the right spot. For this operator - as you can see - I need ... (cont.)

They were installed in 1982. Ive sent of photo of the right open window but its the left open window crank that has broken. The outside window part is fine its the hsndle crank broke off. Please advise what i would need to buy ti eemove current item and which replacement part could work. I also ha ... (cont.)

need replacement part. screw part unscrews from mechanism.

My casement crank handle is broken. I put a screw through it to make it work, but that's not going to last. What are my options?

I need a replacement for a Milgard casement window lefthand operator with a stripped gear. Number on the long crank arm is S-1081-102 Number on the short crank arm is S-1081-03 Number on the back of the bracket that you screw into the sill is C-1081-101

Do you have a replacement for this? Thanks, Rich

Windsor windows 20810A 30744 Pivot arm measures 9.5 inches

Hello,I was referred to you by a window professional. I have these two broken truth arms and I would love to replace them for my tenant. Please respond via email or phone. Michael