Viewing all customer Discussions for:

39-032 EntryGard Dual Arm Operator

Good afternoon! Would you be able to recommend replacement parts for me? I wasn't able to find any markings on the hardware itself and don't have a name brand for the windows. Thanks :-)

Hello! I am in need of a replacement for this entry guard by truth window crank. Engraved on the small arm has the number 30744B. Any info would be greatly appreciated. Thanks, Handyman Jeff

One of them say AMS 6795 One is for the right window and another picture is for the left. We're looking to replace both.

Worm gear has stripped on four of my window cranks. Printed on the arm is: "Truth" and the number "6203." On another support arm, "Entry Gard Truth" is printed

Hello - seems like this is rusted and one of the other windows has a similar hinge but that one is broken. The window opens to the right (when facing the window from the inside).

Hi,Do you have a dual arm operator, cover and splined folding handle like those shown in my photo's?Thank you,Tom

The base that mounts to the sill is 2 1/8" front to back, 5" left to right. The straight arm is 9 1/2" long. The curved arm that extends to the right is approximately 8" long. Thank you

The name on the handle is "SEALRITE" The dimensions as best I can tell are 4&3/4" on the e3xterior arm and 5" on the inside crank. Numbers include 20755 on the upper arm and 31229 on the lower arm. Please not these pictures are for a window that opens to the left but the replacement I need is for a ... (cont.)

Hello, I'm have a issue with the crank assemble for both of these windows. In the one picture with arrows you can see the bottom brackets is broken and the guide bar has detached and will not stay in place even after I reset it. I'm have the same issue for both the left and right side. Also I ... (cont.)

Hi Found your site by doing an internet search.. Do you have the operator handle and cover? Danny

I purchased part number 39-032 and 39-031 from you on 5/26/2022. I now need to purchase the 2 hand cranks associated with the dual arm operators that I purchased.The only numbers I see on the hand crank are US PAT des 361490ThanksFred

trying to locate new crank gear as a few of ours are stripped. The crank shroud is marked "Truth" and the only number is inside the handle "5054". Any help you can provide in identifying a compatible replacement is appreciated.

I'm need to replace the crank gear screw that holds the casement window handle to the opener on the jam. Not sure I'm describing this well :( In the photo I'm pointing to the part with my painty finger.

This handle is getting stuck and not opening nor closing.

Hi I am looking for this bronze LH arms are 9 & 4-3/8

So, my name is Drew and I'm a project manager for a remodeling company in Charlotte, NC.During the demo of a recent project, someone decided to throw the window crank cover, as well as the lock cover, away.Research so far has led us to determine the manufacturer was Vista Windows. They were purchas ... (cont.)

I have 13 Marvin windows with worn out cranks. They were installed in 1986. Entry Gard Truth The numbers on the part long arm 30470 LH Short arm 20810 connected to short arm L30841 Gear plate 30830 40372 If we can identified this, I will need 6 Lt and 6 Rt.

It is Trust brand 31538 with a B on the short arm.

Hi,Looking to replace these Truth Entry Guard 40471 window openers with slides since rollers are worn. Would also like handles that will fit Mortise Lock, square face, 3-11/16" item number 82-223. Additionally need the inside latch for this lock- you previously sent lock above, but no latch. Thanks ... (cont.)

Hi: I just want to be sure I am ordering the right parts. I am looking to replace the arm and guide. I believe these are what I need based on the pictures above - Arm https://www.swisco.com/EntryGard-Operator-9-1_2-inch-Arm-Left-Handed/pd/Casement-Window-Replacement-Operators/39-031 guide https:// ... (cont.)