Viewing all customer Discussions for:

39-032 EntryGard Dual Arm Operator

When cranking window the gear shaft just comes right out because the ring around it that has a lot of fine lines does not stay in. I have tapped it in all the way. A Marvin window, casement, there is a number on crank mechanism 40471. Truth hardware.

Hello I am looking for a part number for crank handle and the actual operating arm per the attached pictures below. This is what it looks like without the cover.

I have two windows needing replacement parts for R split arm crank mechanism probably installed in 1988 when the house was built. The only id seen is the logo Truth and a number 20810. Can you please help me find two of these parts?

Looking for I formation on replacements and costs for these as we have several that are stripped out and may need replacing.

Hello, I'm looking to replace both window cranks pictured in (2) attachments.Both are labeled as EntryGuard Truth. Left side has a part# 40887Right Side has a part# 31538.Let me know if you require any further info.Thanks,Joe

I need to replace this hardware on a kitchen window.

I ordered 4 #39-032 entry Gard Dual Arm Operators to replace 4 Truth Entry Guard Operators #R30842. Please see attached picture with old R30842 on window and new 39-032 beside it. What part should I have ordered or what am I doing wrong?

Our Wilmar wooden casement window (around 28 years old) won't close once opened. The device appears to be stripped. Wilmar is no longer in business. Have been told we need to replace the entire mechanism. Prefer bronze to match others. There are two arms connected to the device. Not sure wher ... (cont.)

The only markings I see are Semco on the crank handle and EntryGard on the crank arm. Hope that is enough to match. Thanks!

Entry guard truth. On the bottom arm there's 40754

Old marvi. Window. Open, but doesn't close. Do I need to replace the whole crank?

Hi, Hopefully this is enough information - the house was built in 1996 and I'll (likely) need either 5 or 6 of these - they are all the same size but different handedness. I'll do a complete inventory if you can help! There are tiny, hard to read numbers in the metal arms. If that is needed, let ... (cont.)

The window will open, but the center piece comes loose when trying to close.

I need what is shown in the photos

i have entryguard ingraved on it. looking for2 replacements one is 30842R and the other is 30841L the long arm is about 9 inches long

replacing the window crank - the arm mechanism and handle = entire unit Truth 20801/30841L Thanks

I need four right and three left handle, crank for windows

Looking for replacement part. 80 stamped on left side 06 stamped on right.

Good morning - I need replacement cranks for left and right casement windows

Need a replacement dual arm casement operator that was installed in 2012. Also, need a new cover and crank (white in color). The operator is for a left side casement window that swings out to the left. Straight Insert arm is 9 and 1/2 inches long and marked Entry Gard TRUTH on one side with the par ... (cont.)