Viewing all customer Discussions for:

39-032 EntryGard Dual Arm Operator

Can this handle replace existing handle on 39-031 and 39-032 dual arm operators? Bob

The arm operator on my window operator sheered off and no longer works. I'm looking to replace it. Not sure which operator is the right replacement piece. And then also, the eye hooks on the window that would act as the locking mechanism on the actual window is missing.

Windows are developing a bit of rust on arms at bottom, though the big issue is corroded lower slide shoes that disengage from the hinge and then jam the windows to prevent proper closure. Would like to see if you can identify the parts we should order based on these photos. All I could identify on ... (cont.)

Hello, I am missing a couple parts for a window that I have. I am sending a couple of photos one of the window that's missing the parts and another one that has the parts. The window has a manufacturer code of ELL-1 and series 800/850Thank you

Hello,I'm looking for a replacement for the part pictured above. It is marked "Truth Hardware", "Entry Guard". Short arm has stamp 20810. The long arm is 10 1/2", and the short arm is 4 1/2". Would you have anything like it?Thanks!Brian

Can you tell me the make of this operator. I have 6 to replaceThanks Larry

casement window crank plastic outer assembly cracked

Hello, I recently purchased part # 39-032. I need the bracket to attach to the window. I accidentally threw it away.

My k&k window cranks and latches. Please identify part to order.

Has stamps as seen In attached pics Truth entry guard one looks like it's 30842R for right side? L30841 for left? Also had the numbers 20810 stamped on it. Need five sets of left and right replacements please advise.

Good afternoon! Would you be able to recommend replacement parts for me? I wasn't able to find any markings on the hardware itself and don't have a name brand for the windows. Thanks :-)

Hello! I am in need of a replacement for this entry guard by truth window crank. Engraved on the small arm has the number 30744B. Any info would be greatly appreciated. Thanks, Handyman Jeff

One of them say AMS 6795 One is for the right window and another picture is for the left. We're looking to replace both.

Worm gear has stripped on four of my window cranks. Printed on the arm is: "Truth" and the number "6203." On another support arm, "Entry Gard Truth" is printed

Hello - seems like this is rusted and one of the other windows has a similar hinge but that one is broken. The window opens to the right (when facing the window from the inside).

Hi,Do you have a dual arm operator, cover and splined folding handle like those shown in my photo's?Thank you,Tom

The base that mounts to the sill is 2 1/8" front to back, 5" left to right. The straight arm is 9 1/2" long. The curved arm that extends to the right is approximately 8" long. Thank you

The name on the handle is "SEALRITE" The dimensions as best I can tell are 4&3/4" on the e3xterior arm and 5" on the inside crank. Numbers include 20755 on the upper arm and 31229 on the lower arm. Please not these pictures are for a window that opens to the left but the replacement I need is for a ... (cont.)

Hello, I'm have a issue with the crank assemble for both of these windows. In the one picture with arrows you can see the bottom brackets is broken and the guide bar has detached and will not stay in place even after I reset it. I'm have the same issue for both the left and right side. Also I ... (cont.)

Hi Found your site by doing an internet search.. Do you have the operator handle and cover? Danny