Viewing all customer Discussions for:

39-032 EntryGard Dual Arm Operator

I have a casement window that has no track on the bottom nor the part that attaches to the window that would ride in the track and keep the window close to the opening while it slides back-and-forth as the window opens or closes. In general, the window parts are truth/EMCO and a number of parts I pu ... (cont.)

Based on the pictures, can you identify which part I would have to order? I would specifically require the metal screw- its worn out and unable to consistently open the window Thanks Michele

Must be identical replacement parts for both the left and the right opening window arms. The teeth on both gears are broken

Could not find any part numbers on removed parts. The photo showen is from another similar window. These windows were installed in 1997.

Need operators handles and coners white can you send me a quote

BIU

Need inside of handles for 2 windows .They won't open.

Hello, I’m reaching out regarding a broken crank mechanism on one of my Caradco casement windows. The operator still opens the window, but it no longer closes it properly. Upon inspection, it appears that the end of the spiral shaft inside the operator gear assembly has broken off, preventin ... (cont.)

Awning window old. No label on window

please let me know as soon as you can

I am looking for an operator arm for Windsor casement window, Pinnacle series, from 2003. I also sent another request for a separate part.

I am trying to replace the part that the window opens on at the top of the window. It is a Windsor casement window, Pinnacle series, from 2003. I believe it is called a hinge part.

from the 1980's Marvin window Numbers on the crank model 40471 Numbers on hinge: 30751, 30451, 30744

Hello, I need help locating the replacement hardware for this window. Please let me know if I can do a "best guess" using the photos provided or if a specific measurement is required. I only need the replacement crank hardware pictured. Thank you in advance.

there is a brand marking on photo 4

the gears seem to be stripped.

Window needs handle and crank assembly

Truth entry gard 20810 are legible on the operator arm

I believe this is the EntryGard Dual Arm Operator 39-032 and 31, but I could use your help in confirming I am correct. Thanks, Tad

The gears on the actuator arms jam and prevent the full opening motion of the window. The long arm on the right side is approx 9.25 inches and has 40754 stamped on the underside, and also says EntryGuard Truth. The shorter arm on the left is approx 4.5 inches and is marked 20610. I also need to get ... (cont.)