Viewing all customer Discussions for:

39-077 Casement Window Adjuster, Solid Brass

The metal frame that holds the sliding bar appears to have a spring wire broken. Is there a replacement part? Photos are of part removed, close up showing wire twisted out of place, and same part installed in another working window.

Old casement window limiter

I need is the screw down knob/lock for brass casement stays. Is it possible to buy the part separately, or do I have to replace the stay?

Aloha, We have some old windows that have a handle that slips on and then we have to awkwardly crank the window open. (handle like this: https://www.swisco.com/Wood-Casement-Window-Operator-Brass-finish/pd/Casement-Window-Replacement-Operators/39-268) we would like to retrofit it with some handles t ... (cont.)

Hi there, I have an awning window with a broken 1866 Curtis operator that I would love to replace. My local window store has left me out in the cold for helping me find a viable replacement/substitution. Do you have any viable options available? Would be happy to supply more info if it would be help ... (cont.)

I am needing two of these pulls for windows that are missing them. Not sure where to start and having no luck online.

I just bought a house that was built in 1958. Most of it is original. I have a lot of windows with these and many are broken. The windows are actually painted shut ? and apparently people tried to force them open using these operators. I'd want every window to have the same hardware old or new. T ... (cont.)

We are looking for parts to these stays on the casement windows. Someone thought they were an old Pella design. Any help in identifying the these would be very much appreciated and of course if you have the parts. Thanks

Hello, I have the attached hardware crank for 1929 outswing casement window hinged on right. Planning to replicate the same but hinged on left by reducing a 60" long window to allow for more cabinets. You may not have the exact Matson I would require 2 in design as previously stated. Thank ... (cont.)

We need replacement Fenestra casement window openers for the 1935 home we're renovating, but haven't been able to find them anywhere. Can you help?

Need help identifying hardware for these Pella windows

I have purchased a TH-23076 and a TH-23077 from Home Depot. They do not have the guide attached to the window that the roller would fit in, nor do they have the crank and crank cover. Can you help me? I need on for each side.Thanks,Glenn

I am trying to identify the manufacturer of this window. The house was built in 1960 and the awning window is of a hinged metal operator that is unfolded and then you push out the window with a bit of force. I am trying to figure out how to remove this window so that I can install new windows. The ... (cont.)

My 1957 ranch home has original windows that I am trying to restore. There is this push bar hardware piece that bends at a right angle when closed, and straightens to push the window out. I have several windows that are missing it need this piece replaced. Any ideas are most helpful. Thank you ... (cont.)

Please see attached photos of the current casement operators. This part of our house is original from 1939. The window casements will require long screws to fasten securelyCan you please advise regarding getting replacements?We will need 4 pairs of replacements (left and right for each pair).Than ... (cont.)

We are officially desperate and would appreciate any help you could give us finding this hardware. These are Anderson awning windows from the late 50's. No crank. It uses a lever system, where a hook at the end of the lever connects to a small bar on the window. The issue we are having on 8-10 of ... (cont.)

Needed replacement parts.

Need a part number for this item. It works, but not well enough to keep. Need all parts that are needed for this to work and be stored.

The only marking I can see is Win-Dor underneath the track. They don't have cranks. I would like to get cranks for them if possible or replace the entire mechanism if I have to. Thanks!

Attached are pictures of casement hardware of an original 1938 window. I am missing the crank and latch for the window but would be willing to get all new hardware if you have something that works. The window is only 13" wide.