Viewing all customer Discussions for:

Door & Window

Looking for (2) window replacement channels with shoes. Thank you.

I need to replace the hardware for this crank. The gears are stripped at and it will not pull the window closed. Having a hard time finding anything that matches because the handle is on the left hand side.

Plastic piece that keeps the window secure when it closes.

I need to replace the left side operator. Attached are photos of the right, which I'm able open, but the left side needs the replacement part. Can you tell which part I need? The operator arm is about 8 1/4 inches to the elbow / bend, then another two inches (approximately)

Hi, I need to replace that defected window part. The handle does not HOLD inside the mechanism hence cannot open the window. Thanks

brass - part of latch for locking windows

Need help identifying this crank operator. Thank you.Donald

23 & 5/8 (just the metal, not including top fitting) Stamp: 23 4 B.S.I PP Manufacture: unknown (2005) Quantity: need 4 balances

Channel length = 14 13/16 in. Stamp is 1420 No marks as to Manufacturer or when it was made (probably in 2000 when the house was built) I need one for now.

I want to order Series 180 Coil Balance, but not sure how much lb should it be. Could you suggest? Thanks

Hi, this window will not fully close without someone pushing the window on the outside. There is a small piece of the linage broken, it looks like it is supposed to snap on to a small head but it is worn away and won't stay clipped on. The linkage says "interlock p1090;" this only brings up Austra ... (cont.)

Looking for just the lower sash of this single hung frosted glass window. the current one does not fit correctly and comes out easily. Glass is 21 3/4" (w) x 10" (h). Thanks!

Right hand crank

I have the same item in need of replacement. Please let me know what/how to order 4 of these please. Thank you!

I have another window that needs a new set of balances - image attached. It is the same type of window we used before - they are 32" long, with 32c stamped on them - so if I could get a quote for two of the same setup with the last 6 we worked with that would be great! I believe 2 x 32" Series 795 ... (cont.)

It is 5/8 thick

Looking to replace the block and tackle window balance on my double hung window. The length of the balance is 20 inches. I think it is a Vector window but I'm not sure. See attached pictures.

Window crank on left side ( turns clockwise to open) won't close window full way . I want to replace inside and outside hardware on both sides

A good you tube video guided me - I could use some help identifying the parts I need for these windows. Many thanks. MB

Trying to find the correct housing. Hope you can help me out