Viewing all customer Discussions for:

Door & Window

One broken

The little plastic gliding piece which attaches to the bar outside the window, pushing it open and pulling it closed when cranked, is broken. I'm looking for. replacement for the plastic piece or bar with plastic piece. Photos are attached. Thank you. Kevin

Thermo tech casement window will not close completely...hinge is broken and or missing parts. Installed in 2001 long part of hinge is approx 10" long

Small casement window operator. Labeled "Truth Hardware" Only other markings are visible in the first photo.

This is the part I'm looking for. It is a plastic guide shoe. It is located on the exterior sill and a metal guide is where it is attached to..

I need to replace the three point locking mechanism on my CGI Sentinal Door.

Top, internal piece, small ridges on long edges. Slides into top piece.

we have Milgard windows from 2004. One of the balancer's broke, ie a plastic piece broke from it.Attached are 10 photos. let me know if you need additional photos? the metal piece is 25 3/4" and 5/8"x5/8". 'd like to order 4.

I am looking fora replacement for the crank handle attached

I have a Masterpiece model#G6068L00201 sliding patio door. I would like to replace the door handle. I'm not sure of the mortise size.

I have a Cascade Series Signature line single hung window. The window will not stay open due to both balancers have fallen out of the window. Its a Series C9200 H- R30- 48x96, UM111, AAMA/NWWDA101/IS 2-97. Imprinted on back of balancer is 26.5 TS-6. both balancers are in disrepair. ... (cont.)

I'm looking for a window screen latches to replace these

Simonton Coil Channel Balancer - see attached photographs and manufacture's information tag for specifications. Need to repair 4-5 windows relatively soon because I'm sellingthe house. Each window is missing this part either left or right side. Does this matter? Spoke with a young man named Chris ... (cont.)

I'm looking for window parts

I'd like to find a replacement for this storm door handle. The outside handle is 5 1/2" hole to hole, and 6 1/2" overall. The handle's hole-to-hole measurement is 2" and 3 3/4" overall

I purchased this home 28 years ago. These windows were already here two of the windows go up and down, but The Channel balances have fallen out and have to hold the window up with a piece of wood. I know these can be repaired. I am just a homeowner but I am handy. Would love to be able to fix them ... (cont.)

Hello. The parts are both 19 inches long. 1 part has " 1840 " stamped on it and the other part has " 1840R " stamped on it. Both are from the same window. Photos are included. Assistance to identify parts would be appreciated! Thank you.

The spring from the sliding door latch cam out. We want to replace the latch.

Hello, my windows were put in our home in 1992 and they are casement type windows and we are looking for the seal rubber to replace on the windows. I am not sure what it is called, but hopefully you can direct me Bill

he length is 7.25 inches The center to center for the screws is 5 inches Hopefully that will help find the replacement. I would like to confirm if Product Code: 82-082 would work.