Viewing all customer Discussions for:

Door & Window

I removed window crank operator & want replacement purchase part 30472 was on log arm.

This roller is not working. Comes from an old Solaris brand patio sliding door.

25-year-old window shoe assembly broke. Seeking replacement shoe assemblies for double hung windows. Uncertain as to best specific option.

I am not sure which part is right for our windows. Please see attached photo. The pivot shoe measures 1.25" H x 1.5" W x 9/16" D

length - 2, 2/8th top 3/8th of an inch with bottom 5/8th of an inch

hi, the door lock says klein, i'm searching for the rolller in the picture please. the wheel itself is close to 1 3/4" and 5/16" width (5/8" end to end bracket)

Do you have a replacement or distributor for this? Located in Hawaii.

My kinro window won't open and the metal bar inside is stuck on the top but the other side is fine. How can I fix this??

These came out of an Insulate sash window. They are stamped 31 5 BSI OE. They measure 9/16" wide and 5/8" tall. Can These be ordered? Thanks

Photo of Hurd Casement arm. Need a left and right. Gears are not engaging to be able to open/shut. Sorry for the delay "life" got in way of our project.

The top window has 20f. B61. Vl on the metal The inside window bottom has 22d The top has green and the bottom has blue latches

Hallo I already order couple times from you It's great parts I already have selected balancers and want to add couple things Top sash locks (seding picture) And from last order I measured wrong and missy to trim channels canI buy some channel rivets? Thank you Bruno

looking for this 30 inch my numbers are 86 29-9 ha5 cmc1 what part will work?

Hi Customer service, Request parts identified to replace a broken coil spring assembly. ( See attached photos) Item is marked as 7L. Your assistant is greatly appreciated. Thank You, Karl

Can you identify the correct part as show in the picture? Measures 1/2 x1/2. Need to replace a bunch of these. Thanks, Noah

Hi, can you help identify which part this is?

I need a replacement operator for a Weather Shield awning window which was manufactured Dec 1990. The worm gear has come out and I cannot use the mechanism to close the window. Thank you,

Hi. I need a casement window crank handle. As you can see in the photos, the handle has a slot / notch and slides onto the operating mechanism. Thank you.

Vinyl glazing strip measuring 7/8" wide by 3/16 thick, tan in color for Joyce Manufacturing sunroom windows.

The top is stamped C-9400-1B on the backF-9400-8A with a "B" below that.As you look at it the crank is on the left. The 2 screws closest to the window are 4 1/2" center to center. The one I see that references that number the screws are 3 11/16 apart center to center. I need 2 left and 2 right. any ... (cont.)