Viewing all customer Discussions for:

Door & Window

I need 4 replacement rollers for my sliding glass door.

House built 1976...which repla cement cranks will work

The latch That faces outside on my Pella screen door broke. Attached is a photo of the inside outside and an existing one that is functioning properly.

Metal channel is 30" Stamp is hard to read but I can make out 29 RN BS1 TF Unknown window manufacturer 5 windows are basically the same and one is slightly narrower...a total of 6 windows and 12 balances. Most of the windows have no channel balances, clips or other hardware along the sides of the wi ... (cont.)

This latch handle came from a Cole Sewell ST Paul MN storm door. 02219796042 65 reg. number Other parts to this original set are in photos attached:

These windows are Simonton company, about 20 yrs old. Need new balance parts, as shown in photos. Thank you

Looking for one Channel Balance Shoe for my stock single hung tilt window. I have attached the image of the broken Shoe and the only labels IO can find on the window. Please help me to identify the correct part. Thanks, John

Trying to figure out which model I have

Please find me a hinge that i can use -see pictures

Metal is all brass. Old measurements (some wear may have occured?): Wheels measure 1-1/8" Housing meaures 3-1/16" long, 11/6" wide, 1-1/8" deep Flange has hole, not slot, and is above the housing

Can I purchase a slide bolt that is for a screen window? I need the right side not the side depicted in the picture.

Right and left needed. 2.75" length.

Having trouble finding the exact match to replace/repair window screens.

Can't find any brand names on the latches or the windows?

Long it measure 1 5/8 Wide 1 1/4 Thick1/2

Looking to replace broken hardware

Holes are 1 1/2 inches 2 1/4 inches

Please help identify correct part. How much it would be. Also new clips. Measurements Length 30" width 1/2", hook included in full piece photo. The windows are PGT. Home was built 2006.

This is from a casement window of unknown manufacturer. It snaps into the edge of the frame and covers the gap between the frame and the glass. It serves the same purpose as any glazing vinyl but is much wider and harder plastic.

I am looking for these grille fastners for the glass windows. Can anyone please help me finding them?