Viewing all customer Discussions for:

Door & Window

Sliding glass door roller mechanism 1 metal wheel 1.25" diameter Height 1.2" Width 0.6" Door is generic from the 1980s

I need 2 hinges for crank out window on a 1968 mobile home. The pictures have the original hinge broken off

Our window does not close properly. We need to have the AC on but our window wastes it alll. I have put a picture showing what's broken we need the part ASAP

I have attached pictures of the casement window crankcase that needs replacing. It is an Entry Gard Truth 3084IL which I believe corresponds with Swisco part 39-031 and 39-032. I could not obtain an exact measurement for the long arm but it appears to be 10" and the short arm is 4 1/16". Will you be ... (cont.)

These parts on this window are not broken but it was easier to access the balances . Once identified I need balances for a upper and lower window which I will measure

Seems like a generic type crank. The distance between mounting screws is 3 3/16".

Hello, The coil in my window snapped and I need to find replacement parts. The serial number on the coil mechanism is CertainTeed H65 32/3M. There appears to be two coils on each side of the window. If there is anything you can do to help me find the correct replacement parts I'd greatly appreciate ... (cont.)

I am trying to replace x2 'Truth' window operators - the long metal piece that attaches to the actual window measures 26.75" in length. On the underside of the metal base that the crank is attached to are the following markings: Truth 45206 Made in USA US PAT. 4505601 PAT. Canada 1986 There is als ... (cont.)

Looking for these, in particular the little plastic tip, but might come as an assembly with the spring

Bathroom top window. Left and right needed.

Attached pictures show damage to both balance and pivot assemblies. Just took pics of one window. Looking at the rest of the house there are multiple instances(at least six) of the balance assembly not in its proper location. It looks as if the original install did not have enough fastener engag ... (cont.)

mounting holes look to be 3 13/16, entire length 4 5/58 handle length 3

The windows are Litehouse 437 (415) Sh white, 10/6/2003Sales order/Line: 9015233/13 Sold by Simonton. If located, I would like to order 6 pcs. Thank you, Alan

Looking for new handles to replace ones which were somehow lost by installing contractor or one of his subs. We also see that several of the locking levers are missing. They are a simple plastic lever extender.

looking for screen corner replacements as shown in photos. There are no part numbers or descriptions on them

Hi, I have a broken sash control handle, and Id like to replace the mortise as well.

Before I purchase on your site, is 82-265 the correct replacement lock for this, top to bottom are 11" on the screws? I think the internal lock is broke. If I were to buy a replacement handle as well, what handle w/lock will be compatible as well? The latch seems loose and I took off and do not s ... (cont.)

I need the replacement parts 801020 window coil balance

Trying to find a replacement for this part

A# 20590331 61-27270-22model # 948.65273021 65273-002latch kit # 16081 no longer availablesubstitute DPX16081 no longer available if you have a match that doesn't have the dead bolt that is fine. I don't use it.the numbers A # and Model # I got off the door.Mike