Viewing all customer Discussions for:

Door & Window

See fotos. Latch is 2 5_8 x 5/8 inches at the top view. The hole it slides into is about 1/2 to 9/16ths inches. I sent a previous email, but have more pictures and dimensions. Thanks for your help.

Trying to find out if this door handle is available. I believe it is a Swisco product. I'm looking to replace it with a handle that can be locked from the Outside as this is the entrance to my backyard studio. Thanks in advance. Malou

I need four window Springs that the metal part measures 24 inches on the old Spring it said 23 4 JO Cadwell on the outside. I also need two window Springs were the metal part measures 11 inches. These two Springs have 1020 posted on them. I need stops for all these windows which would be a total of ... (cont.)

The length and width of latch is 2 5/8 x 5/8 inches

Please help identify the proper replacement part(s) for fixing broken window shoe. Pictures of current shoe are attached. The closest match in your parts catalog is 15-266. Can you confirm that this is the best part for my application? Thanks- Chris

Looking for replacement for item shown in pictures

I am looking for a replacement for this window balance which I removed from my window. I need two, one for each side, as they are both broken. There is no identifying information on the balance or the window that I can find, other than a small "5" printed on the coil itself. The white cover pie ... (cont.)

Please let me know how I can get this replacement part

Stamped 31ds; BSI; RL 42. From Milgard window.

Metal channel is 30" long x9/16x9/16.

Hello,We have about 6 that need to be replaced. I am attaching photos as I am having trouble figuring out which ones they are. Also including the measurements:2330 3si pl 24 inch 1/2inchThank you for your help!Blair

This balance is stamped with "Caldwell 28 1/4 2 IJ" it's 1/2" wide and 29 1/4" long w/o fittings. Can tell me which model I need?

Need balance shoes for 2 piece coil

I bought your 55-120 snap in glazing. Whats the best way to cut it to size? What tool to use and is there a correct order of installation (like install full length top and bottom first, then sides, or full length side pieces first then top and bottom?

These windows were bought from Pan Am in 1977. We need one crank to be installed on the right side in a dark bronze finish. The inside dimensions are. 4. 3/4" high and 2 1/8" wide. Let me know what you think or if you need more info. Alan

Good morning, I recently purchased the 82-043 thumb latch, and am having issues making the connection due to the width of my door being 2 inches. Any suggestions on what is needed to make the install work?

Need help to ID.

I believe this is from a american craftsman screen , one side has an open slot , the other side closed slot, can't seem to find these anywhere.

Need a replacement, left side

I have single hung windows. 28 inch long balances, half inch wide. Stamped 2 7 3 0 (backward C) BSI. There have never been take out clips. See photos of window frame. It appears mine operates a little different from your video I watched. I need this black piece also that attaches to the top corner ... (cont.)