Viewing all customer Discussions for:

Door & Window

I need 6 of the 27" and 2 of the 23" there was no markings and I measured just the length of the metal. They did measure 9/16 which is your 1/2 ".

need the nylon roller only on a truth enrty gard push arm. Looks like its press fitted on. can it be removed and repaced? Just need the roller. Thanks Ken

The wheels are on a Viking Mfg patio door. I removed them and thouroughly cleaned and lubricated both. I discovered that one wheel had its bearings loose. I guessed wrong about which wheel to buy so I reinstalled the original wheels for now. The door slides much better but I do want to fine the corr ... (cont.)

39" tube Bottom sash weighs 18-20 lbs

There are no markings on it but I need both sides

I have a friend that has an older home with a screen door hinge that is broken, it is approx. 6 inch long 1 inch wide on a metal screen door 3 mount holes it appears to be a self-closing hinge. it is a very old home, and she would rather not replace the door any thoughts.?Thanks Doug ... (cont.)

Would you have replacement sash handles for this style of window.The window is from a company called Sash and Storm from Lima OH that is no longer in business. Thank you,Russ

Locksmith cut out lock and I need to replace the 3 mechanisms and door handle

This info was in the frame, 120 25 Oct 06 Lowe 1165038-004 Please see photos, I need the piece in photo two.

These go around an impact glass pane. The seals melted after a fire. I don't have an installed picture.

My slide bolt on both sides have broken off

I have a Milgard casement window. I am looking for the black track slider with rivet attached to it. The slider is on the top and bottom of window

This is for a Simonton window. Width is half inch and length 24". It corresponds to the 390 model you have on the website. I was unable to find the right weight based on the markings. It is a bigger and heavier window than the 2250 weight balance

Two wheels: 1/2" wheel dia. by 1/4" wheel width Assembly flange: L 2-5/16" W by 5/8" Thick 1/16" Wheel case: L 2-1/8" W 7/16" D 7/16" Overall depth (case + flange) is 1/2" Flange is broken in the pictures. Windows where manufactured Philips Products in Elkhart, IN and now out of business per AA ... (cont.)

Single Hung Non Tilt Traco window system, need 2 balancers compatible with this system resembling the attached photos, no markings on hardware, also missing the hook pin on one of the windows

Hi I need help isentifying my broken window crank opener. I have attached the photos. Thank you Steve

Thinking of replacing our current lever handle and plate (possibly keeping our existing multi-point locking system) Would you know the exact brand/spec of our hardware? thinking of picking something more modern/simpler profile.

Hi! The supporting sash arm for this large awning window has separated from the plastic sliding plate. I am wondering if there are anything that might be suitable to replace the whole arm or if the plastic sliding plate is sold separately somewhere. I do not know the manufacturer of the windows and ... (cont.)

Overall dimension is 22" long. Plastic parts at each end are 1/2" square. The number in the second picture is stamped on the back of the balance. Thanks for your help!

I need to replace the locks on my patio doors. Only information I have on the locks is stamped WIPI. The locks are 7 3/8 long with wooden handles . Thanks for your help.