Viewing all customer Discussions for:

Door & Window

Can somebody help me identify this product and let me know a good replacement

These are for our storm windows. These were made for the Ohare airport soundproofing program. I have reached out to Harvey and they can't help me

Need 2 single wheel roller replacements for slider

This part is attached to the sash and the scissor hinge connects to this. This part was broke when I installed the window, and when I opened up the window the hinge fell down. This is a plastic piece.

Hello, the coil is broken but i see the plastic is cracking as well so thinking to replace the whole assembly on both sides. The brown coil is pretty worn, has either 6 or 9 written on it can't tell which side is up. Also there is 16 written on the outside of plastic case. Hope this helps. Thank you ... (cont.)

21 inch balancers, metal channel measured only. From a Milgard window, balancer marking was: 20 4 AR Caldwell.

I need some window parts and hoping you can help me. All of the parts are broken so I'm having a hard time identifying them.

Hello I'm looking to purchase about 6 2990 32 BSI channel balance.Thanks Chuck

I need 2 replacement channel balances and screen holders

Hi there, Can you help me replace this lock assembly? The part in the picture is undamaged, but the plastic parts it connects to inside the window frame are broken. Thank you, Ben

I need to replace these. They measure 31 inches total including the plastic. I broke 1 retaining clip while removing them so I need one of those to.

I need 2 of these operators with screws, handles and wood trim

please see pics, this is all i have at this time, its for my in laws window that wont stay up. need to replace the balance coils. let me know what other info is needed thx

1/2" width 27" length Fittings with wings Shoe depth 1-3/32"

Some of the latches are bad and not functioning and some just have the lever broken. What will replace these

Screw holes on locks and keepers are each 2 1/4" center-center. Underside of lock body has raised "1527". Top of lock body has raised "LOCK". Underside of lock cam has raised "1490". Underside of keeper has raised "1513". Lock body and keeper are each 2 7/8" long. Thanks, David N. Mann, PS My ... (cont.)

A small square post that tilts down to prevent a horizontal window from opening more than a few inches has broken off this part. For a white viny window.

triangular pop-out button that stops the window from opening more than a couple of inches. For white vinyl window.

window tilt-out latch button for white vinyl window. It has two 1/8"-square vertical posts underneath that move the latch that's inside the window

Do you have these parts?