Viewing all customer Discussions for:

Door & Window

Attached are photos of the window in question. one photo shows the left side with the channel guide intact. the other photo shows the missing guide which I guess popped out with the balance. They are triple pane windows from Canada. The code on the glass says CMHC 9208. Can you please tell me the pr ... (cont.)

i am need of some balance 795 series 26c but the current ones have hooks instead of screws, is that a possibility to customize them to have a hook? Hopefully the photos will help , just let me know if you need any other info thanks!!

Hello, I'm looking for replacement sash locks for Hayfield vinly horizontal sliding windows manufactured in 2006. The current window is a model 201. I do not know what the model was in 2006. These are windows that Morton Buildings used during that time. I do not need the keeper. The locks are dieca ... (cont.)

I need a replacement part for the extender arms that are attached to the window. There is a number on one of the arms 30744

Good morning! I have spiral balances in my windows and wanted to confirm the type. It looks like the S600 but I didn't see a white tip option in the 28/29 inch and wasn't sure what color to pick. I also wasn't sure which size to pick based off the 28.5 that mine are. I included pics to assist. Thank ... (cont.)

The markings "7 A J" are on the coil and # 7 on the shoe balance.

We bought a house with mirrored rolling closet doors in the bedrooms. Buchmin Industries sticker on the backside. Many of them are having issues with broken wheels. Product Code: 23-176 looks similar but not quite there. I think I may have been that outer tab out when taking it out of the door. ... (cont.)

Hi, this photo is of a right tilt latch from a vinyl window. I'm hoping to find the matching left-side latch. Thank you!

I need to replace the fuzzy pile weather seals on our home's Bryn Mawr windows. I don't know for sure which number on the tag photo is the model number (6978?). I need the shorter pile for the sides and the thicker for the bottom of the upper window. I should also replace the vinyl strip on the win ... (cont.)

one says 2420 and the other from the same window says 2410 whoever replaced the window messed up all the windows in my home all say 2420 and i believe are all 25" long.

I have the knife latch for a Pella window that is double lanes and removable. One of the latches has come out of the slot and I Do not know how to put it back in the window. The latches hold the window pane in place and create a seal. Do you have instructions on how to put the latch back in ? It ... (cont.)

Hi,I'm looking for a replacement window balance. The length of the metal is 26 inchesThanks,Anthony

Looking to replace the window balances in PGT SH 1400 bt single hung windows. the balance rod is 5/8" wide 29" long. there are no marking on the existing balance. the clips that hold the bottom of the ballance spring and the window also need replacing. I could not see a color on the bottom of the e ... (cont.)

I need a few of these locks. They're on the windows of an older cabin.

I need replacement hinges for 12 windows. 6 RH and 6 LH. It looks like I need Truth part number 14.76. Measurement A is about 5-17/32. Do you sell this part?

I would like to replace three easement window hardware in brown. The windows were part of a Four Season Sunroom. The body measures five inches and screw holes are 5.5 " apart.Please identify this part so I may place an orderThank you,Morris

24" long, 1/2 wide markings are 23 9 19" lt kp caldwell

I bought a (40-194) mortise lock and I thought I was going to have to return it. But now it appears that what I bought fits, I just need the key cylinder. Thanks, I appreciate your help!

Marked 28-3 LX CMC 11measures 29" long x ½" wide excluding plastic head/footWould have been originally installed around 2005looking for suitable drop in replacementThank you.

There are no retainers for the latches to grab on one sash. Photo is of the working sash. Need 2 retainers.