Viewing all customer Discussions for:

Door & Window

Home was built in the early 90s. They are 1/2 wide and 27" long.

The metal part is 14 1/2 inches width is 1/2 inches One is broken but I don't mind purchasing two to match perfectly.

Each side has half inch coil balancers. One has number 6, one has the number 5. I need 2 number 6. Or anything compatible to make the window go up and down again. The shoe measures 1 and half inch height, half inch width, an inch and a quarter length.

One of the corner latch of aluminum frame strom window glass frame latch is broken. Could you please let me know if you have this

Metal is 30inches not sure of the stamp/sash weight. Winged on both ends.

Missing both the plastic and metal parts.

Hello Before I place an order I just want to confirm that this item is correct one. 26" Series 380 Channel Balance Product Code: S380-26. Option 2550. Since I didn't see a 25-5 Im assuming 2550 is the closest option. 26" metal length. Thank you

I ordered the Truth® 15.30 Traditional Split Arm Operator, Straight 4-1/2Inch Link, Left Hand. The operator would work but the crank piece is to small to fit the existing hole. I think that 39-220B combined with 39-452 may work but I'm worried that the crank piece is ~1/2 wider than the existing c ... (cont.)

I need a pair of lower screen door rollers similar to photos above and enclosed diagram (with measurements). One side of the roller has a PAT NO 38,879,893 but no manufacturer's name is visible on the door. Photo of Roller #1 shows a screw on the upper mechanism which is used to fasten it to the ... (cont.)

Hello, I am looking for a bubble weather stripping that I have never seen before. In the photos, you can see that it is a bubble weatherstrip with about a 1/4" lip that slides into a piece of plastic. Could you help point me in the right direction?

The window won't stay up it comes down once lifted on the way to the top.

I can see daylight on the sides of my windows, Where the filth seal or packing is. It looks like it needs replaced. How do I go about getting old Felt out? And how do I know what thickness felt should be?

I have a 20 yr old Simonton double sash window that's always had the wrong, inadequate balance coils. I don't know the model # of the window, and it would be useless providing you with the coil # since they are clearly the wrong ones. What data do you need to point me toward the right replacement ... (cont.)

Do you know the brand/type of window shown in the picture? I'm looking to get my window unstuck and trying to find out all I can about what I have and how it works. Thanks!

Hello, Can you please direct me to the correct part number for my Milgard window balancer. I will need 2. Numbers on the balancer is 32 4 DV CMC 7 Thank you.

Swisco I'm replacing the 22" Window Channel Balances with Stamp 2120 and WINGED Top and Bottom Sash Guides on my window.Please advise as to which part to purchase.Thank you,Hans

Hello, Our window operator gear sheared off. We need to replace it, but not sure of the model. The brand of the current one is Truth. Thanks, Jason

Wondering if you have this or a comparable product to replace a couple of glazing beads on an aluminum window. Best I can tell the manufacturer of the window was Mayfair based on the MFR code CMF-1 I found on the window. Any help would be appreciated. I've included a picture and dimensions. Thanks ... (cont.)

The part measures 27 inches, 26 4 GN Caldwell

I need 4 new window pivots. As well as two tilt in frame locks. Please look at the pictures attached. Thank you Btw I place an order thinking I had found the right one but it doesn't fit. Item #15-105 Will I be able to return it?