Viewing all customer Discussions for:

Door & Window

I've encountered a problem with one of my windows. It started to slide up and down abnormally, and upon closer inspection, I noticed a broken metal slider part on the side. The part has since come off completely. Unfortunately, I am unsure what this specific part is called, which makes it difficult ... (cont.)

Truth model 40068 Single casement, 1996 install 11.5 arm. 5.5 crank front

Looking for the correct part. I can read a few numbers: 461010

I need a qty. of 2 if these items.These are for the connection points on Awning operators I am sure you know what I need as you have gotten all other parts I have needed 100 % Thanks Chuck

Hi, I was visiting a customer's house and they had a plygem door that was installed by another sub. 90% sure it was a 4780 series 3 panel door. At the bottom, where the interlocks meet, close to the tracks, there is pure daylight. She was expressing that bugs and lizards easily walk in and I was hop ... (cont.)

Can you help me locate these parts.

Here are pictures of my stationary panel stays Head, sill and door part number 80-042 or 80-043 are not the same as these Can you help me locate replacements so that I can replace along with the other hardware.Thank youTim

Hi - I need to replace the latches on our Kinro single-hung tilt windows. The marking on the back of one (broken and removed) shows L-12 59 as an identifier. The ones we have are 2 5/8" long, not 2 3/8" like the ones you offer. These widows are original to the 1996 Liberty manufactured home. Wil ... (cont.)

Hello, I took my hardware out to install a dog door and now I can't find the parts. I purchased 82-030 and 82-226 from you. The mortise was the wrong size by my mistake but will the handle I purchased work on this door? Also, if I replace the correct mortise I saw I need the 9 7/8 but it won't attac ... (cont.)

need4 May be a peachtree citation .

I need glazing plastic strips for a better bilt Installed in 97. Insulated glass

Metal frame is 1/2" x 28" Code stamped on metal frame is 2730

Canadian patent 919213

Looking for the part for windows

Please confirm tilt window latch #26-419 & 26-420 will fit 15 year old TRACO windows. The dimensions appear to be in-syce with your schematic drawing. Thanks - Dan

I need replacement rollers for the window in a new to us house that I do not know the manufacturer of. PFA images of one of the rollers I was able to remove from the frame. The bodies are OK, the brass wheels were not cleaned, got stuck, and have flat spots worn on them. Full replacment or replaceme ... (cont.)

Do you have a replacement operator for this window? The tag says C.C.M.C.12286-L Casement. Thanks Mark

I'm trying to find a replacement channel balance for our tilt window. The window wouldn't open when we bought this house, and when I did some digging into the issue I found this channel balance was broken. On the side, there is a stamp that says 26-7 and near it in smaller font is a stamp that says ... (cont.)

Channel is 26 inches and marked 25 4 DO CALDWELL. These date to about 1995. No maker's identification that I can find. Windows are all 36 x 60 single hung vinyl. I need 14 of these

Sistem up and down is broken