Viewing all customer Discussions for:

Door & Window

Looking for the SKU

Looking for a handle and cover for this older Pozzi window Can you help? Jen Weld handle may also work? Also the lock is missing but really not as important as getting a crank to be able to open the window.

Hi. Has a stamp on the top of hinge that says Truth which im assuming is Truth Hardware. Help me identify this please.

Hi I have a broken 21 inch window balance. Can you advise me on the proper replacement .

I cannot locate an exact match that will fit the existing patio doors in the home. I just bought. Could you possibly help?

Could you please help me find this handle? We took it off but can not find a part number.

I need 4 of these. Not sure if there is a left and a right, but I need 2 left and 2 right. The only marking I can make out is a #7 on the pivot shoe and part of a Patent number. It looks like the coil spring broke away from the pivot shoe,

The first photo is the track. 105" long. 3" wide. two tracks 1.5" apart Label on mirror says finest copper backed mirror HI-MIRROR made in Japan

biu

I bought 3 sets of tilt latch 26-393B but they dont fit. I need the latch that is about 2 3/4" long not including the part that sticks into the wall of the window. Can I return those and you send me the ones that I need for the images that I sent?

The operators I need resemble both the 39-318 and the 39-171 but the lengths of the individual arms are not identical. Please check the compatibility. Thanks, David

I have double hung tilt windows. Some of the window latches have broken. I need to identify the correct replacement parts with correct sizes to match the one I currently have.

I have a MI windows and doors sliding glass door. The locking mechanism no longer stays closed. Do you sell the replacement part? See photos. Thanks!

Hi I am looking for the channel balance replacement parts for my double hung tilt windows. Based on your parts list, I believe the 770-26B could be the right parts for it. The sash weighs about 16.5lb. I have attached the pictures for your references.

Hi again - the lower trim piece and operator cover is missing from this window. Is this a piece that you would have available? Also looking for the plastic operator cover. This from an early 1990's Kolbe & Kolbe window. Thank you.

This piece mounted to the bottom of a spring is supposed to be connected to the bottom of the window with a post going through that hole, but the piece is broken at the bottom, so the post slipped right through and the spring retracted entirely. I'm trying to figure out if I need to replace this pie ... (cont.)

I have a broken part, which holds up a drawer in a Kraft Made pantry drawer. 3in long & 1&1/4 w; one arm 1/2 in

Latch for a awning window that has a broken lever. Assuming lever is part of latch.

I could use a balance for right side of window. Length. 26 inches Also need closing latch which is missing from right side of window. Bottom sash Any assistance would be appreciated

White plastic base near lower window top side frame.